Jump to content
SAU Community

Tips Or Maps For A Beginer Programmer (emanage Ultimate)

ICE_BlooD

By ICE_BlooD,
in Engines & Forced Induction

 Share

Recommended Posts

ICE_BlooD Apprentice

ICE_BlooD

Posted
Posted (edited)

Hi

i want to tune my Emanage Ultimate for a 1996 Nissan Skyline R33 RB25DET.

for eliminate the cut boost, and tune with 12PSI of boost.

if anybody have any tips or maps that i can use to begin the configuration.

Thnks

Edited by ICE_BlooD
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Not trying to sound rude here.

But you are probably better off reading and learning about the car first mate before you try tuning it.

Running 15psi on the stock turbo is mechanical suicide. Not one person i know that ran more than 12psi has had the stock turbo live forever, and mostly dead sooner rather than later

ICE_BlooD Apprentice

ICE_BlooD

Posted
  • Author
Posted

it's ok, i'm in this forum page because want learn and know more about my car.

I read about the 12 PSI but in ebay i saw a mines ecu tune to 1.1 bar, this is why i think

i can tune it to 15 PSI with racing fuel,that i was wrong.

ok I'll first tune to 12 PSI to know about the EMU, before buy a pressure sensor to eliminate the AFM.

a friend is selling me a T70 Turbo with compressor A/R.70 and turbine A/R.68 do you recommend this to me?

i know i've got to change some other things/pieces(top fuel rail with 550c injector, fuel pump, turbo manifold, any other recomentation??)

Does the stock piston support 20PSI of boost?

swanny180 Proficient

swanny180

Posted
Posted

I think maybe youd be better off paying someone to tune your car for you mate...

Or at very least go through the forums and read absolutely everything you can to brush up as much as possible in terms of what RB25s are capable of...

Im not saying this to be a prick, just that it will be an expensive mistake if you f**k up from not knowing what youre doing...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...