Jump to content
SAU Community

Recommended Posts

  • 8 months later...

Just bumping this thread as my R34 seems to be doing this. I'll drive along and literally watch the gauge drop to empty and the fuel light come on. Then I'll stop for a while and it'll go back to where it should be. It'll just randomly drop and climb. It seems to reset itself to the right point when you turn the car off and on. What could be causing that?

Sounds like a wiring issue, from tank to gauge. Or maybe some contaminants on the resistance slider?

Had any work done near the tank? Pump etc?

Had any wiring done, stereo?

The only thing I've changed in the past week is the battery. The car has a voltage stabiliser that the previous owner added, could a dodgy earth be causing it? It does sound like wiring to me. It does have a stereo (which is useless in Australia and I'm not using), I don't think there's been any work around the fuel tank. I've only had the car a week (imported and went through compliance.)

Did they change the filler neck and dropped something in there while doing it?? Did they drill child restraints into the parcel shelf? clip a wire?

Try and find out whats been done to your car recently.

Edited by GeeTR
my fuel gauge has been acting werid lately its been going up and down and never seems to be stable.when i press on to accerlarate the fuel gauge drops then when im stopped in traffic it slowly comes back up. does anyone know what it could be?

You may find that the fuel guage float has parted company with its mounting. This happened in my R33 GTS-t and was easily fixed.

Did they change the filler neck and dropped something in there while doing it?? Did they drill child restraints into the parcel shelf? clip a wire?

Try and find out whats been done to your car recently.

They don't put a restrictor in the fuel tank any more. They mounted child restraints but that wouldn't have done anything.

Paul SM - yeah, you're probably right. Today it was fine, just has it's moment. When I cbf I'll get it fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...