Jump to content
SAU Community

Recommended Posts

1. Modify your new inlet to be able to take the ventilation hose (and this has to be done BEFORE the afm)

no, you want it after the afm (which is where it is stock) so your afm doesn't get covered in oil.

whatever you do don't block the ventilation pipe. if you do you will just blow your pcv out the moment you boost it. the pcv only works under vaccum. just put a breather on it for now ,then either get a catch can or plum it back into the intake pipe.

no, you want it after the afm (which is where it is stock) so your afm doesn't get covered in oil.

whatever you do don't block the ventilation pipe. if you do you will just blow your pcv out the moment you boost it. the pcv only works under vaccum. just put a breather on it for now ,then either get a catch can or plum it back into the intake pipe.

thats what i meant, in betweem the turbo and the afm, i was just picturing it my head and if i saw the pod, afm, hose then turbo in a straight line i would say before the afm but thats just me lol.

But like i said i meant in between the inlet of the turbo and afm...

Edited by R34GTFOUR

i've picked up an oil breather for now, i planned on getting a catch can in the near future, so is it wise to get a catch can with an oil breather on it or is it pretty imperative that the air come from the intake pipe and i get an inlet welded in?

next time, buy a 1m vacum hose of the right diameter and run it from the top of the cam cover where the other end connects to, and have the other dangle under the car somewhere or on a cable tie. all that comes out is oily air, not really oil flow type oil.

you will notice no performance difference, just an odour all the time until you fix properly. make sure not to have it in front of a tyre or on the exhaust and your set.

*TEMPORARY* you wont hurt the motor but will not be helping the environment.

you will not have to change oil more frequently, as the tiny bit of oil in this pipe was about to be burnt up with your petrol anyway. racecars dont want motor oil in their petrol because it produces inconsistent octane leading to detonation. if there is a lot of oil coming out, you have much bigger problems than a missing inlet pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...