Jump to content
SAU Community

Recommended Posts

There are many different incarnations of the TD06 20G. There is a TD06-20G, TD06H-20G, TD06N-20G, TD06S-20G, TD06L-20G and TD06L2-20G. Then there are the optional turbine housing sizes as well. There are 8cm, 10cm, and 17cm housings available for the 20G based compressors. So there are 6 different turbine wheel options to mate to the 20G compressor plus the 3 housing options. There are also compressor housing options but the 20G wheel performs about the same in all of them, even the little TD05 based housing.

There are also different versions of the 25G (T67) although not as many. TD06H-25G, TD07-25G and TD07S-25G. I think there is one more but I'm not sure of the name. Turbine housing options for the 25G are as follows. 8cm, 10cm, 17cm and 22cm. So 3 or 4 turbine wheel choices and 4 housing choices. The 25G is available with a 4 inch inlet or 3 inch inlet on hte cover.

Some of these may not apply to your application but maybe helpful for the archives or just in general.

jeff

Ok... here's some pics and some more info. its a TD06H-20G. On the compressor wheel its got the trust part number: 49179-52010 which is different to the part number on the trust blue plate (49179-01190) It also has 0/8 and H9 written on it. The exhaust housing has a Q then DUCM then 2 then 6G also 7 9-14400. Dunno if this means anything... any more idea's of HP and spoolup time?

Originally posted by sidewaymambo

Bloodline..my TD06-25G (T67) has 16cm turbine housing ..

Ahh.. another choice that I wasnt even aware of. Thanks for pointing that out.

Now on to the turbo itself. I cant say with any certainty at what rpm the turbo will spool on your application as I am not familiar with the performance of that turbine housing. I will say that the TD06H-20G in an 8cm turbine housing is capable of 450+whp at its limit on a 2.0L engine. I have made right at 400whp on the smaller TD05H-20G 7cm on a 2.0L. The 20G compressor is rated at approximately 44lbs/min depending on who you ask.

Now to the turbine wheel. The TD06H turbine mated to a larger compressor can deal with power levels nearing 550whp. I have seen a 2.0 dyno 611whp on a 75 shot using a TD06H turbine wheel in a 7cm housing.

I know that this is not a direct answer to your question, but hopefully it will provide some insight to what you can expect out of the turbo.

jeff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...