Jump to content
SAU Community

Recommended Posts

tell him u want all GENUINE nissan parts BRAND NEW... they cost a bundle if u dont know where to go... the guys at palm get in all new parts and order them from japan... should bump the price up a bit.

i agree tho i wouldnt want it to go anywhere that they want u to depending on what insurance company ur with

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384190
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I'm with just cars at the moment. But the place that they are sending me to just sounds like your average local body shop. So i will have to us the genuine new parts deal.

Palm told me that the both back quarters and the roof would need respraying. I hope that others think the same.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384242
Share on other sites

if they want to do it properly then they will have to... depending on how badly damaged the back is if they have to make any repairs to the rear qtr panel then they will need to blend the paint thru the back and roof... if it goes further back then they will have to blend it thru the doors.

i used to be a panel beater/painter so i know a few tricks of how to do it properly and dodgily :P

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384252
Share on other sites

It is hard to say how damaged it is. It looks like it has popped out the sides a little, but really not a huge amount. The bumper is totally stuffed, the lights are now away from the panel, and the back panel has been pushed in a bit.

I guess that you could do the dodgy and just repair the bumper and the rear panel without fixing the rest. I guess that I'll just have to assume that they will do a good job, and if not, i'll worry about it then. Not the best way to go, but with the lack of knowledge that i have, what more can i do.

I'm sure that they won't try and screw me over.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-384286
Share on other sites

  • 3 weeks later...

im still waiting to take mine down... have to try and get my ****ing seats in before i can drive it down... its almost primed and ready for paint... its just these bloody seats that im waiting for!

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-414922
Share on other sites

I dropped down last night to see what was going on and was amazed at what he showed me.

Not only is the rear panel destroyed, the actual floor of the boot is all warped. I didn't think that the damage was that bad. When i say warped, i really mean it. Con told me that you guys had been down and seen the car.

Also told me that Just Cars are being rather difficult for him, so I'm going to have to give them a call today and sort them out. I'm really missing my car.

The exhaust is also pretty messed up, so I'm going to get that replaced with a bigger system. I was going to do it anyway, and now it will cost me less.

Whistla, what sort of spoiler are you going to be putting on your car?

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415075
Share on other sites

typical insurance arseholes... always making it harder than it needs to be. i was very tempted at one stage to just go and get a VT SS cause the insurance was 1500 cheaper even tho it had more power than my car.

its prejedice i tells ya!! (yeah i cant spell, i know it already)

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415238
Share on other sites

no panel shop can afford to cut corners today

Why not?? for insurance jobs though I guess..

Anyway, seeing as body shops, painting and things are a common occurance for us skyline owners it would be nice if we could tee up some form of sponsorship so we get cheaper rates, in return for some advertising or something. Other clubs have a similar arrangement.

So far I've been quoted $300 for my bar resprayed - reckon Palm will be able to match or better that? Not so keen about my car being away for 2 weeks, as I don't have a "spare" car sitting around unfortunately.

When i get my bond back from my old place, I will finally get my bumper and grilled resprayed - only been 3 months or something!

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415240
Share on other sites

i gave the insurance company a call today and got them all sorted. It is so hard to be mean to some people when they are being so nice.

They originally told me that i had to get 2 quotes for them, then when i call them today, that said that i only needed the one, and one from Palm would have been enough. If they had of told me this 2 weeks ago, it would have all been fixed now.

I'm sure that if we spoke to the guys at Palm, they might do something for us. There is enough of our cars there already.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-415250
Share on other sites

  • 4 weeks later...

Ok. so getting sick of waiting for my car. It has almost been 4 weeks for a 2 week job. I know that the insurance company slowed them down a little when they had to get something else assessed, but this is not funny anymore.

I've sort of gone easy on them as they are replacing the exhaust with a bigger one for me, and touching up a few areas, but maybe it is time to get on their backs a little.

I've been told that I'll get my car back this Friday. I guess that i'll have to wait and see. I'm not holding my breath though.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-454644
Share on other sites

Originally posted by Arsn

Ok. so getting sick of waiting for my car. It has almost been 4 weeks for a 2 week job. I know that the insurance company slowed them down a little when they had to get something else assessed, but this is not funny anymore.

I've sort of gone easy on them as they are replacing the exhaust with a bigger one for me, and touching up a few areas, but maybe it is time to get on their backs a little.

I've been told that I'll get my car back this Friday. I guess that i'll have to wait and see. I'm not holding my breath though.

trust me mate the wait will be worth it.... i seen ur car when i went down there and i seen the job they done... they did it properly.... cut off the rear and welded a new wall in rather than pulling out the wrecked one and patching it up.

the jobs ive seen them do ddown there are quality.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-454962
Share on other sites

hehehe i know how u feel about wanting ur car back... i want mine back on the rd SO BAD!! :)

but yeah man from what ive seen they are doing a good job which is why im going to end up getting m ine finished there instead of where i was going to get it done cheaper.

Link to comment
https://www.sau.com.au/forums/topic/18137-body-shops/page/2/#findComment-455033
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...