Jump to content
SAU Community

Recommended Posts

I finally coulod be bothered ripping on my iacv to fix my 2000rpm and hunting idle. turns out the spring had snapped.

I removed the snapped piece and it now hunts between 500 and 1000 rpm every now and then.

Trust me no where as bad as the constant 1500 - 2000rpm idle it had before.

Does any one know where I can get a replacement spring with out buying a whole new unit

Link to comment
https://www.sau.com.au/forums/topic/181451-new-spring-to-help-my-idle/
Share on other sites

Im sure some one has replaced just the spring.

Also anyone know of a good wideband afr sensor i can perminatly mount?

I've been looking for one myself called just about everywhere I could think of in Canberra and no one had springs that small. Just bought a new IACV off here for $35. You might also want to have a look at the pin, half the reason my spring keeps stretching is because the pin pops out and that plate turns right around.

Edited by Kwyjibo
anything i should look out for when taking out the icv ?

gotta check mine as well as the idle is very high,

Make sure you have something magnetic in case you lose anything in the engine bay. As was said don't screw up the gasket, also make sure you are very careful when opening it because the pin holding in the plate can pop out very easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...