Jump to content
SAU Community

Recommended Posts

so i got my R32GTRvspec-1 a couple of days ago and i didnt notice so maybe its just started to happen when i take off or get to about 3k revs its starts rattling from engine its pretty loud lol and i know this sounds bad but theres no loss of power or any other noises its a really fast tapping but i dont notice anything else is it meant to make this noise its hard to explain what the noise is lol , is it possible its injectors or tapets or sumthing , imj goin to takeit to xspeed to see hat they think but just wondering if any one else hears things liek this lol any help would be apeciated , thanx

matt

Link to comment
https://www.sau.com.au/forums/topic/181463-help-my-gtr-rattling-noise/
Share on other sites

the eingine revs fine and it hold a bar of boost fine so im not sure if its anything crazy or not lol im alos wondering for peoplke with rb26's when does ure limiter stop u reving cos mine goes past red to 9k then stops me i opend it up once to see what it revs o n it went past red lol so maybe its bin tuned to do so ? i know it has a chiped ECU tho

That would probably be the big end bearings, especially with that redline.

Do Not drive the car!!!

Drop the oil into a clean pan and see if there are any metallic flakes, tiny ones that will look like gold. If so then get a tow truck to take it to a workshop.

9K is a little bit much to be revving it to unless it is a really strong engine build.

Bearings are about $140......

You are looking at about 30 hours of labour, machining if you have damaged the journals, then the inevitable forged this and that, other extras to get done while the engine is apart like making sure you have the wider oil pump drive (hard to know on a 93 model) and so forth.

probably not much change out of $5K if you keep a lid on it

If you let yourself get screwed on the job then not much out of $10K

Get a very hard firm quote up front and written variations on anything else that may eventuate.

Get a very hard firm quote up front and written variations on anything else that may eventuate.

Maybe first off you would get the engine removed, stripped down to see what needs replacing and then get a quote from there...

ok talked to my g/f's cousins mate who owns a engine rebuild place and looks like its a rebuild lol n looks like hes gonna sort me outwith a proper forged everything depending on what the problem is properly so could end up bein a good thing this lol , hope fulyl a fully worked rb26 at the end :rolleyes:

Regardless of whatever else needs to be replaced, the labour should be firm and that is where just about everyone gets stung. They can show invoices for parts, but most of the cretins will just gouge for the labour.

Talk firm prices right up front, not after they get the car in the shop and can extort you. Any adjustments can be made later through consultation and in writing.

yea i dont drive it any more lol it definatly is somethign serious its louad a fcuk , waitin for some one to come have a listen this week i dont drive it to 9k lol just once to see where the limiter was n it went into red lol im like wtf then limiter hit n slowed it down thing is it drives perfect n no loss of power :S just a loud tapping noise when i get toabout 3grand then slowly goes away after that ? :S

i read sum on here that some one had a stuck valve or sumthin n was getting the same noise so who knows , the car is straight from japland so i knowi should get it tuned for our fuel n find out what exactly is in the engine lol

Edited by pism
i read sum on here that some one had a stuck valve or sumthin n was getting the same noise so who knows , the car is straight from japland so i knowi should get it tuned for our fuel n find out what exactly is in the engine lol

If you have a valve sticking then it won't idle nice. Just had dramas with that on a mates 26. Does the noise happen when cruising at 3000 or only at wide open throtle??

when cruising i dont think it does it much when u plant ure foot or maybe its just to loud to hear ? idles fine i think i havent noticed any thing at idle

I think it's gotta be detination. if it was bearings it would still do it at cruise. Knock a heap of boost outta it. Like back to 8 pound or whatever is stock and see if it still does it. Or take some timing out just by moving the crank angle sensor. Probably just your jap tune trying to run on our fuel and conditions. It's fairly commen. Mine came in with an IMPUL ecu in it and it was useless. Too agressivly timed for ozzy conditions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...