Jump to content
SAU Community

Recommended Posts

As per the title Ive got 2 filters leftover after selling my GTR.

Have been opened as they'd been in the cupboard and wanted to make sure all was still in there. There's 2 part numbers on the boxes: Apexi 500 - A024 and 5F3004

I'm after $155 for the pair plus delivery or ideally pickup in SA.

Also have a brand new key blank for an r32, still in factory Nissan packaging. $60 plus $5 to post.

Ive also got an r32 GTR boot badge. Original equipment styles. Looks to be in pretty good nick, some slight warping of the paint but nothing a lick of paint wouldn't sort. Chasing $60 for it, I'll take pics for those who are keen.

I'm not posting up pics as it's pretty obvious what they are, if you're confused have a search on google.

cheers

tom

Edited by TBee

key is the blank silver edition. still in nissan packaging. the box says KEY00 - 00185 and I used the exact same one for my r32 gtr.

I can take pics of filters if seriosuly needed but they are exactly as described if you want to check google image or the like for what they look like installed. Mine are a brand new pair as described.

also note ive got a genuine GTR badge for sale too!

are the 2 apexi filters part of a kit (comes with gaskets/bolts/brackets)? if so ill take them

there are definitely unused gaskets and bolts still in bags but there are no brackets as such.

These are essentially replacements for those who already have an apexi kit. I'm not sure if the apexi filter will bolt straight up to any other aftermarket elbows off the afm.

let me know if this is what you were asking.

cheers

tom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...