Jump to content
SAU Community

Recommended Posts

Hey guys,

Helping a mate out doing a rb30 conversion in his r32 gtr and having some probs. What have people done previously here just used the 26 mounts?

Thats what we are trying to use. Someone else did the mounts for my car and I can't go and look at it to check atm cos its not here. Can someone just confirm what needs to be done 26 or 30 mounts? and does it have to be lowered?

Cheers.

Edited by James_03
Link to comment
https://www.sau.com.au/forums/topic/183273-r32-gtr-rb30-engine-mounts/
Share on other sites

just for future reference for anyone else doing this mod.

rb26 and rb30 mounts are not the same. rb30 mounts from an r31 are different, and gts-t mounts are different again. rb26 gtr aluminum mounts must be used. Also the bonnet on just about any gtr will foul as we have found out. Must have cut mounts in myn.

Cheers.

just for future reference for anyone else doing this mod.

rb26 and rb30 mounts are not the same. rb30 mounts from an r31 are different, and gts-t mounts are different again. rb26 gtr aluminum mounts must be used. Also the bonnet on just about any gtr will foul as we have found out. Must have cut mounts in myn.

Cheers.

By mount I am referring to the rubber part. Obviously the mounting bracket is different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...