Jump to content
SAU Community

Rb20det 230rwkw, Blitz Bov, Pbr Hd Organic Clutch & Flywheel

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I am in putting a new motor in my car and the RB20 that is in it will be available in 2 weeks.

the engine has done less than 100,000 k. it was put in the car when it had 48,000 and has done 50,000 since then. The timing belt, water pump, idler and tensioner have been replaced. the engine is currently making 230rwkw and is in excellent condition.

As it is coming out for a conversion it will not be complete but would suit someone with a blown RB20 that wants a good condition drop in motor. it will be complete head and block with no ancilleries.

$400

Also have a blitz super sound BOV in excellent condition, it is fitted to an R32 factory pipe and I would need the unmodified pipe in exchange.

$100

Also have PBR organic full face clutch with pressure plate and flywheel. I have no idea how many k's it has done but it is mint! excellent brand clutch that will hold +200rwkw looks like it has done less than 200,000 k's

$100

All items located in Canberra but freight can be organised :nyaanyaa:

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

sill all here. anyone? please don't tell me I need to buy a datto 120y to drop this all into :)

don't think I won't do it!!!!

abu Grand Master

abu

Posted
Posted (edited)

Nic, the clutch your selling is that the same one thats running in the car at the moment, holding 230rwkw?

Also, how much meat left on it, or is it near new condition?

If you were in Melbourne man, I wouldn't mind grabbing that motor for a spare one to build up..

Freight to Melbourne? ;)

Thanks,

Abu

Edited by abu
CEF11E Veteran

CEF11E

Posted
  • Author
Posted
Nic, the clutch your selling is that the same one thats running in the car at the moment, holding 230rwkw?

Also, how much meat left on it, or is it near new condition?

If you were in Melbourne man, I wouldn't mind grabbing that motor for a spare one to build up..

Freight to Melbourne? ;)

Thanks,

Abu

Hey Abu ;)

the clutch is in excellent condition. it was actually on an RB30 but is the same as an RB25 heavy duty clutch. I can get some pics for you. its a PBR :) and they dont make crap

The engine would cost about $100 to freight.

I am coming to melbourne on wed and thurs so might be able to bring the clutch for you?

abu Grand Master

abu

Posted
Posted
Hey Abu ;)

the clutch is in excellent condition. it was actually on an RB30 but is the same as an RB25 heavy duty clutch. I can get some pics for you. its a PBR :) and they dont make crap

The engine would cost about $100 to freight.

I am coming to melbourne on wed and thurs so might be able to bring the clutch for you?

Good stuff.

Writing up a PM for you now Nic.

Abu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...