Jump to content
SAU Community

Recommended Posts

All parts available at the moment, i have made a short list of parts, but if theres something that you want and i havn't listed it pm me.

located in Clayton, S.E Suburbs

Take the lot for $600 (- brakes, bov)

Parts available

Front calipers, rotors, pads $400

Brake master cylinder $80

Diff was 300 Now: $250

Tailshaft was 150 Now $100

CLutch Master Cylinder was 100 Now $70

Full doors was 500 Now $150

Cabin Light was $30 Now 10

Passenger Seat (cleanable stain) was $120 Now 50

Drivers Seat was $150 Now 80

Roof Lining $30

Carpet $40

Jesus Handles $20 pair

Vents $10 each

Handbrake $120

Passenger Window Control $80

Handbrake Skin $10

Under steering wheel plastic $20

Indicator Stalk $50

Wiper Stalk $50

Sports Wheel & Boss kit $100

Steering Column Surround $30

Rear view mirror $20

Fusebox $30

Seatbelts $50 pair

Rear Seatbelts $30 pair

A Pillar plastics $50 pair

B/C Pillar plastics $60 pair

Front wipers and motors $60

Rear wiper and motor $60

Washer bottle $20

Overflow bottle $100

Air Conditioner (full system) $100

Rear window $100

Drivers window $70

Passengers window $70

Drivers ¼ window $40

Passenger ¼ window $40

Added: 1 x stage2 BOV with adapter for 33 and possibly 32/34: Asking: $150ONO

post-22920-1193925157_thumb.jpgpost-22920-1193925021_thumb.jpg

Photo's: taken off due to loading time, PM for pics

post-22920-1189432965_thumb.jpg

post-22920-1190989712.jpg

post-22920-1193140011_thumb.jpg

post-22920-1193140065_thumb.jpg

post-22920-1193140255_thumb.jpg

post-22920-1193140412_thumb.jpg

post-22920-1193140461_thumb.jpg

post-22920-1193140555_thumb.jpg

post-22920-1193924974_thumb.jpg

Edited by Taso84
Link to comment
https://www.sau.com.au/forums/topic/184498-all-sold-sorry-guys/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Do you have the B pillar interior plastics?? The bit between the front doors and the rear 1/4 glass? Some moron installed tweeters there in my car and I want to replace em....

Just the top parts between the glass... never looked at em closely but I imagine its two seperate pieces!

yes selling the whole thing 2gether, do u want drivers or passenger seat?

Price has been posted

cheers

Both sides please! Can you PM details

Cheers,

Anna

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...