Jump to content
SAU Community

Recommended Posts

there has been a fair bit of interest from some of the members on here after a S2 Dayz front bar and Dayz rear skirt, so Andrew at Custom Carbon Components ( http://www.ccubed.com.au ) has said that he can make a top quality copy of a genuine Dayz front bar and rear skirt! Rough prices are as follows

$550 S2 Dayz Front Bar

$300 Dayz Rear Skirt

basically the prices are higher than your "average" because Custom Carbon Components only offer the best products, best fit, made form superior products and second to none craftsmanship. also because they won’t be charging for tooling as these moulds haven’t been made yet.

Yunis has offered up his Dayz bits for this job - legend

Andrew needs at least 5 people with 50% deposits down before work can begin

PM me for those who are interested!

:blink:

Edited by Brycey

I don't know much about bodywork, but does that include painting? Does it need to be painted on the car, or can it be matched close enough off the car? Thanks

that price dosnt include painting, and the bar/skirt is painted when its off the car.

if you live outside of sydney or need the bar/skirt posted to you and want CCubed to paint the gear then you would probably need to send somethign like your fuel cap cover for colour matching

currently getting prices on paint

just a thaught guys can they do a mould of the rear bar with the skirt attatched and then smooth it out to get rid of the seam where the skirt joins.and is it possible to remove the numberplate frame setup in the front bar it would look better more airflow etc .my 2 cents worth if we going to all the trouble lets get it rite

post-26949-1189843672_thumb.jpg

post-26949-1189843781_thumb.jpg

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

ok here is my 2 cents worth and i know a few more people with the same outlook i like the dayz bar because. 1 its not too low. 2 because it still retains a semi factory look and not the boy racer apearance. 3 still has plenty of airflow well it will when the jap numberplate bit is removed .personally i would rather keep my car looking like stock as it dosent atract any unwanted attention from the boys in blue and all the boy racers trying to prove something everytime they see a kitted out car

why are u guys goin to all this trouble to get the dayz ones made up from scratch when there is already places making other (better in my opinion) kits ready to go, front, side and rear.. just my thought neway..

I just like the Dayz kit... think it looks more "Stageaish". :)

im pretty positive Andrew can remove the number plate holder/make it alot smaller

not sure about the chrome strips, either adapt your old one or... umm... hey look over there! *runs* :yucky:

still need more people for this to go ahead!

im pretty positive Andrew can remove the number plate holder/make it alot smaller

not sure about the chrome strips, either adapt your old one or... umm... hey look over there! *runs* :mellow:

still need more people for this to go ahead!

Hi Brycey,

Any word yet about paint costs?

Thanks

yeah mate just got some info then, he can paint the front bar + rear skirt for $600 if requested but if you don’t live local to sydney then he recommends getting it done at your local paint shop as the packaging will more than likely damage a freshly painted item - no matter how well its packaged.. so he can do it but he highly recommends getting it locally done if you don’t live in or around Sydney

4 :D

good old joe has put his hand up to be number one, and mike has said he will put some money down for the moulding (to get things happening) but wont pay the total amount till a later date

  • 2 weeks later...
  • 3 weeks later...
are these the sort that crack on impact? or will they be flexible like the quality/stock items?

Oooh, if they were made from flexible composite like some of the drift kits.... like the ones supplied by Flex-Fiber Duraflex or M-FleX, that would be extremely nice... In this case however I don't think the kit parts will be flex composite... not sure the process you'd need for what I'm guessing is a urethane/fiberglass composite item, but I'm guessing for a small number run like this it'd be far too expensive. Although it'd be cheaper than pure urethane parts, and stronger too.

  • 1 month later...
  • 3 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...