Jump to content
SAU Community

Recommended Posts

I received this in my email... can anyone help out?

Hi SDMA members,

We have a hillclimb on 30th September and we are short of officials.

We need a commentator to help Dave as well as the normal flaggies, chocker, grid marshall etc.

Please help out if you can because if we don’t get enough officials then the event won’t happen.

From memory you get lunch, drinks etc and usually pair up for the flag marshalls, so you have help and company and a great position for photos

The good news is I have two maybe's from here now... anyone else interested?

If you want to know all about Chocking... just talk to Sprinterboy, he's done it before. You get to see the burnouts there.

Do we have someone who is comfy on a microphone to help Dave (Timespan) in the box calling out the splits, times etc ?

I marshalled at Tex, and it was shite boring sooo :D

Would put my hand up for the MIC, but have touretts!!

This won't be as long between runs and you can see most of the track most of the time, how about chocker at the start line?

Or relief chocker so the chocker can have a break?

imagine putting chocker on your resume... LOL

I used to own cotton pickers and used to pick cotton, put cotton into module builders to make 40' modules of cotton. Awesome industry... but I often wondered about the contractor that used to run around behind our pickers... his job was to (machine) pull the bare cotton stalks out of the ground and pile them ready for burning... but he was offically known as a "Stalk Puller" :D I'm glad I never had to put that on my resume LOL

Thanks guys

Is anyone else interested?

Could those who have expressed an interest in volunteering please contact David Yates 0419 614 144 for details on where/who to meet up with on the day, let me know if you need a lift or anything.

If you come out to watch, don't forget to say HI to us.

I don't care who does the commentating so long as it isn't Mick :) I can't imagine what he would say about me while Ive got my helmet on and can't hear sh!t, nor would I want to risk it LOL

any other takers?

Still wanna chock for us GeeTR? Sprinterboy (Justin) can tell you all about it... you get real close to the burnouts then :(

basically its on the start line with a chock on a long handle to stop the cars from rolling back for their starts and I'm sure you know what flaggies are. Commentating is really helping Dave (Timespan timer) by calling out the split times and lap times etc.

  • 2 weeks later...

From the SDMA Newsletter

President’s Report – Rob Wall

Sunday 30 September saw another good Hillclimb with 50 entrants. A point to note is that many regulars were missing so with their return we could be getting close to having full fields as the year progresses. The message here is to get your entries in early. Also, with the increased number of participants, we may consider changing the present arrangements so that entries may not be accepted on the day. This is yet to be considered.

We were lucky enough to have some additional assistance for Sunday’s meeting and my thanks goes to Skylines Australia members for the provision of officials. This is an area where the Club still needs to lift its game. The day hasn’t come yet when a meeting has not been held due to a lack of officials but, without more club members coming forward, it may not be far away.

In this regard, CAMS is arranging for several courses to be conducted in Canberra. These will be held over the weekend of 3 and 4 November. Courses of interest to our members would be:

Circuit Course on Saturday 3 Nov - This course is for those who want to progress from a General Official to a Bronze Circuit Official.

Introductory Course on Sunday 4 Nov – Designed to cover general aspects of motor racing officiating and leads from a Trainee license to a General Official.

Club Chief on Sunday 4 Nov – This is a new license category that has been introduced to assist clubs in the running of club and multi club events. Participants must have a General Officials license and want to to be capable of performing the role of Clerk of Course, Event Director or assume a team leader role (except Chief Scrutineer or Chief Steward) at club or multi club events. Two members are already signed up.

If you are interested in any of the above courses, please Email or call Rachelle at the NSW CAMS Office [email protected] or 02 9635 1366.

On general matters, there has been some discussion about the discrepancies between points allocated to those officiating at 2 lap events Vs those driving at 2 lap events. The Committee has agreed to restore parity and every driver that completed the three runs at the 2 lap event will be allocated 2 additional points toward the Championship.

There is a Working Bee scheduled for Saturday 20 October and I would like to see as many members there as possible. Further details will be provided at the General meeting to be held at the Southern Cross Club at 7.30pm on Tuesday 16 October.

Until next time ……

Stay Safe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
    • That is correct,  I have a forged RB25/30det NEO hiding away safely and I wanted to use the very rare greddy vct adj cam gear on this new setup and so I just used the whole thing on my s1 instead of pulling it appear because I'm lazy af 😅🤌🏼
×
×
  • Create New...