Jump to content
SAU Community

Recommended Posts

hI GUYS ITS ME AGAIN......

I POSTED A THREAD A COUPLE OF WEEKS AGO ASKING FOR HELP! AND IF ANYONE KNEW WHAT WAS WRONG WITH MY CAR....

TO GET STRAIGHT TO THE POINT.... I STILL DONT KNOW...

ALOT OF PEOPLE WERE TELLING ME TO CHECK THE ECU CODES.... AND AFTER FINDING OUT WHAT THE HELL THESE WERE I NOW HAVE...

tHE CODE THAT COMES UP IS "12" WHICH IS MASS AIR FLOW SENSOR. dOES THIS SOUND ABOUT RIGHT??

I HAVE BEEN DRIVING THE CAR FOR THE PAST COUPLE OF WEEKS WITH NO PROBLEMS.... IM SOO CONFUSED... SEEINGS JUST A COUPLE OF WEEKS AGO THE CAR WAS PRACTICALLY SHI**ING ITSELF...... REFER BELOW FOR DETAILS...

DOES ANYONE KNOW WHAT I CAN DO TO FIX THIS??

ARE THEESE CODES RELIABLE??? IF CODE 12 IS COMING UP DOES THAT MEAN THAT THE AFM IS STUFFED AND NEED TO GET A NEW ONE???

OR COULD THERE STILL BE SOMETHING ELSE WRONG WITH THE CAR?? BECAUSE I HAVE BEEN ABLE TO DRIVE IT AROUND FINE LATELY..

IT ONLY STUFFS UP WHEN IT WANTS TO.

IF ANYONE HAS ANY IDEAS OR CAN GIVE ME SOME ADVICE ON THE ECU CODES THAT WOULD BE GREAT >_<

tHANKS

hERE IS MY PREVIOUS POST FOR REFERENCE:

icon4.gifPlease Help Me!!! hI EVERYONE.....

JUST WONDERING IF ANYONE HAD ANY IDEA ABOUT WHAT IS WRONG WITH MY ZX?

I have no idea what the the problem is and neither does any mechanic i take it to....

Just recently when driving at about 100k's or less the car just started to lose power and gradually drop down the revs until it came to a stop......

Even when i put the foot down it goes no where... just jolts and gradually loses power, i struggled to get home. stopping and starting about 50 times.

But then a few days later i drove it it was fine! nothing wrong with it.

So then i took it to the mechanics and he said it sounded like the fuel fump was on its way out, so i had a new one fitted, and a service etc...

After this the car was fine again for a couple of weeks... i thought the problem was fixed,

Until last night the same thing happened again but much worse...

I was driving on the ballarat road when all of a sudden the car just started jolting and revving like crazy!

Then if i tried to accellerate it would jolt and lose power, until eventually it would just stall.

Then if i tried to start the car straight away it would start and then stall again.

When started at a standstill, the needle on the RPM meter fluctuates between the 2 and 3 really fast as if im putting my foot on and off the accellerator really fast but i didnt have my foot on the pedal...

Then if i try and take off the car really struggles... i have my foot on the pedal but it isn't going anywhere, just sometimes it kicks in and goes for a bit and then loses power.

However i have driven the car at other times with out a worry.

Does anyone have any idea what this could be?????

It cant be fuel pump or battery cos i just had new ones put in and a service..

If anyone knows or has the slightest idea please get back to me!!

Cheers smile.gif

Link to comment
https://www.sau.com.au/forums/topic/186393-advice-pleaseecu-codes-on-a-300zx/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...