Jump to content
SAU Community

R32 Gtr 1990 Gunmetal With 18' Prodrives

Antimatter
 Share

Recommended Posts

Antimatter Experienced

Antimatter

Posted
Posted (edited)

Nissan R32 GTR. This is a VERY well cared for non-accident car (Grade 4 vehicle) - Clean, straight body and paint. This car has been regularly serviced - recent cambelt, water pump and front seals (all done here). New tyres, genuine K's, tight mechanicals and lots of expensive and tasteful modifications.

Mods include:

Prodrive 18 inch Wheels with new tyres

Cusco coilover suspension

HD Swaybars

Cusco 1.5 way LSD

ARC Oil Cooler

R34 GTR Intercooler

Trust 95mm Exhausts (Quiet...) and frontpipes

Greddy Vernier Camgears

HKS EVC Boost Controller

Apexi EL Boost Gauge

Mines ECU

R33 GTR Driver Seat

This car drives very nicely (better than most GTR's of this vintage) and is an excellent example of a R32 GTR. No accident history - If you are in the market for a clean GTR - then this one deserves your consideration. Inspections are welcome - Please contact me on 0408564877 or via email. Vehicles location is EASTERN SUBURBS. More photos are available for serious interstate purchasers.

Looking for ~ $21000

[email protected]

0408564877

e6c5_1.JPGe725_1.JPG

e7b2_1.JPGe81b_1.JPG

eab5_1.JPGeb0c_1.JPG

Edited by Antimatter
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • niZmO_Man
      J50 clock date suddenly reset to January 1

      By niZmO_Man · Posted

      Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • niZmO_Man
      Wheel Sizes & Offsets For Skylines

      By niZmO_Man · Posted

      8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...