Jump to content
SAU Community

Recommended Posts

Car: 1992 Nissan s13 Silvia

Trans: manual

Engine: Rb20det (from r32 gtst)

Location: Brisbane Southside

Contact: Brendon 0412 809 376

Pictures: coming...

Roadworthy: yes

ENGINE

New Battery

Pod Filter

New AFM

Decarboned Plenum

3 Inch Turbo back exhaust, 2 inch Twin pipes from the diff back..SOUNDS HOTNESS.

Front mount Intercooler (600x300x76)

GTR Oil Pump

GTR Water Pump

Trust Multilayer Metal Headgasket

Rb25 Turbo Running 7psi

Bosch 040 Fuel Pump

Sard Fuel Pressure Reg

Cleaned Standard Injectors

NGK iridium Spark Plugs

Power Steering Cooler

Oil Catch Can

R32 Radiator (serviced with new top tank)

Thermo fan

Wiring has been redone neatly! looks factory.

Mod Plated for the conversion

SUSPENSION AND HANDLING

Jic Coilovers

Cusco Camber Tops

Rear Adjustable Strut Brace

Alloy Cradle Bushes

Alloy Steering Bush

Rose Jointed adjustable tie rod ends

R32 Tie Rods

DRIVELINE

R32 Gtst Gearbox

Short Shifter

Heavy Duty Exedy Clutch

Custom Gearbox Mount

Standard Lsd

INTERIOR

Cd player + 6 inch two ways

Water temp gauge

Oil Pressure gauge (sender not fitted but supplied)

Volts gauge

Boost gauge

Steering Wheel

Gear Knob

Interior is complete and in good condition, the dash has seen better days though it has cracks.

EXTERIOR

17 Inch Steer Rims

Sr Stocko Rears

Nismo Grill

511DIN number plates

More recent pics coming soon, these are a few months old.

HPIM2536.jpg

HPIM2538.jpg

HPIM2533.jpg

HPIM2532.jpg

HPIM2088.jpg

HPIM2092.jpg

HPIM2086.jpg

HPIM2097.jpg

Due to losing my licence i deregistered the car to pay fines...im looking to build a budget track only car now,

will accept r31 manual sedan as part payment, will also drop the price without coilovers and number plates.

Im looking for 11k As is with everything included.

Edited by frost_e
Link to comment
https://www.sau.com.au/forums/topic/187053-rb20-s13511din/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...