Jump to content
SAU Community

New Mods Completed......what Next?

Furiuz

By Furiuz,
in South Australia

 Share

Recommended Posts

Furiuz Enthusiast

Furiuz

Posted
Posted

hey guys

just finished the following mods: 440cc inj, tomei fuel pump + fuel regulator, greddy emanage ultimate, prfect b. already have a cooler, pod, turbs back 3"exhaust. Am producing around 175kw. Looking at gettin more power without increasing the actual size of the turbo what would i go with next for more power? am open to high flowing but thats about it in the way of the turbo as i dont want it to stand out if being defected!

any ideas would be helpful and is this the amount of power youd expect with these mods?

cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/187102-new-mods-completedwhat-next/
Share on other sites
ISC-Performance Veteran

ISC-Performance

Posted
Posted
That is massive amounts of power out of a hyundai getz. :(

maybe you should update your cars section of you profile so that we know what you own and can better advise!!! :no:

lol...I have a getz aswell...dont bad the hyundai's...unless its an EXCEL!! :rofl:

Ryan

R33PER Enthusiast

R33PER

Posted
Posted

Not too sure what car you have, but i recently pulled 171kw at boostworx without larger injectors or a different ecu, would think you'd pull more than 4 extra kw with those mods but i could be wrong

Richo Mentor

Richo

Posted
Posted

On the cheap side, you can get a RB25 turbo, which is just slightly bigger than the 20 and it will look just like stock, remap the ECU and youll be around 190rwkw (at least I was)

Sell the emanage, to cover some of the costs, and enjoy!

Richo Mentor

Richo

Posted
Posted
Not too sure what car you have, but i recently pulled 171kw at boostworx without larger injectors or a different ecu, would think you'd pull more than 4 extra kw with those mods but i could be wrong

he has to be talking about an RB20 dude, why bother upgrading injectors and pump and regulator to get only 170kw. It has to be an old lazy RB20 :)

QWK32 Veteran

QWK32

Posted
Posted (edited)
he has to be talking about an RB20 dude, why bother upgrading injectors and pump and regulator to get only 170kw. It has to be an old lazy RB20 :ninja:

i don't think the rb20 standard turbo can even handle 175 kw and last for more than a week. upgrading injectors and pump wont produce much more power unless you have the air flow to make it, like a bigger turbo. you'd be able to get a little bit out of it with the EMU but not that big of a step for the rb20 on a standard turbo.

looks like its a good base for a turbo upgrade. if your worried about a turbo upgrade getting unwanted attention then a high flow is definantly the go. you've already got the supporting mods to make some good power.

Edited by QWK32
Furiuz Enthusiast

Furiuz

Posted
  • Author
Posted

thanks for the suggestions guys. Lol and and dont bag the hyundai. Nothing wrong with korean made cars......lol

as some of you have guessed, the car is an rb20. i like the sound of the new afm and high-flowed turbo. im guessin a z32 afm is legal still??

dangerman4 Mentor

dangerman4

Posted
Posted
thanks for the suggestions guys. Lol and and dont bag the hyundai. Nothing wrong with korean made cars......lol

as some of you have guessed, the car is an rb20. i like the sound of the new afm and high-flowed turbo. im guessin a z32 afm is legal still??

if you want it to still look stock but go a fair bit harder, pick yourself up a forklift bottom end and chuck all your top end goodies on it.

that and a highflow will get you up around 230 / 250 kws, and still look like a stocker.

bottom ends can be had for around the $100 mark and then find yourself a second hand rb25 highflow from the fs section, and for $1000 you will gain 75 kws.

cheap power really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...