Jump to content
SAU Community

Recommended Posts

Lol i pay out most female drivers, cos seriously so many of them cant drive for shit! Love the ones doing their make up etc as they drive.

Yes im paying out my own 'kind' here but most of them are just baaaaaad drivers.

I know how to drive :whistling:

I just hate relying on others, like the freedom of having my own car

I haven't driven mine for 2 months.. :P

Laid up in the drive with with bits off waiting for some other bigger lumpier bits. :D

n/a sucks I really miss the mid and top end rush.

You know its been too long when a VN commodore and Mazda 3 starts to feel like its got some punch.

no need to miss boost buy a little turbo charade :P with a few mods they can run 14 down the quarter mile

1126_7mg.jpg

Iv been in charade turbo and bloody hell they go alright also im a fan of the tx3 and et pulser both very zippy cars :P

Iv been in charade turbo and bloody hell they go alright also im a fan of the tx3 and et pulser both very zippy cars :P

Had a ET back in the day, ran 7psi low boost and 14psi high boost, I bet you know which was run the most......... Went thru 3 gearbox's, they are shite!! The Tx3's arent too bad, but always remember Jr who used to work at ET back back in the day with Marky, he had one and shat the box out also, unless you put a 4G Evo motor in them, then they rocket, was a black one out at Mallala the other week............

Had a ET back in the day, ran 7psi low boost and 14psi high boost, I bet you know which was run the most......... Went thru 3 gearbox's, they are shite!! The Tx3's arent too bad, but always remember Jr who used to work at ET back back in the day with Marky, he had one and shat the box out also, unless you put a 4G Evo motor in them, then they rocket, was a black one out at Mallala the other week............

Apparently that black tx3 has full evo running gear

haha bunny, well ill forgive u :)

So just got my car back from the mechanics after a week and wow feels like a dream to drive! So much better! There isnt one hose under the bonnet that wasnt replaced.. few new pipes (cant remember exactly which ones) cos they were corroded. New thermostat.. cooling system completely flushed, cleaned and refilled. Engine bay and all underneath professionally cleaned and all shiny!

Shame to sell it now lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...