Jump to content
SAU Community

Recommended Posts

see http://www.skylinesaustralia.com/forums/He...33#entry4249633

for photos of head gear for rb25det

:P

stupid home loan has grown by 4k by the end of december 'cause of these parts fitting and tune LOL

i heard redline shockproof for jap cars is rubbish

yep as i have said befor it stuffs the syincros (spelling) i know 2 people that put it in when i told them not to and both their gear boxes blew

There are many who claim the same.

General comments are : it quietened down my box or improved gear selection but ultimatly the box shat its self and the mechanic said dont use redline.

I have not used it so I dont speak from personal experience.

yes it does quieten it down when the box is almost stuffed anyway but its just a bandaid and it will go

yep as i have said befor it stuffs the syincros (spelling) i know 2 people that put it in when i told them not to and both their gear boxes blew

yes it does quieten it down when the box is almost stuffed anyway but its just a bandaid and it will go

Ok, so your mechanical experience tells you this or you just going by what people have told you. It wouldn't happen to have anything to do with the history of the box or the way the box was treated would it?

Edited by Ryanrb25
Ok, so your mechanical experience tells you this or you just going by what people have told you. It wouldn't happen to have anything to do with the history of the box or the way the box was treated would it?

Shes right, even if she might have heard it on the grapevine. Certainly the age and abuse of the box come into play, there is no question of that, however theres also no question that the shockproof crap destroys synchros. My mechanic (who is different to Kellies mechanic incidentally) said the exact same thing when I took it to him for the first trans service after I bought the car. He drained it and put in conventional oil (aka not the blue shit) which made the synchro issues more noticable. Basically the redline stuff cushions the blow when the synchros dont mesh. You feel it more while you have conventional oil because it has a different viscosity and density. When you have the shockproof stuff, its still doing the damage, u just dont feel it.

There was even a notice on the redline website for a time which advised NOT using shockproof on any synchromesh gearbox. Its pretty much meant for dogboxes (not sure about straight cut boxes).

In either case, my box is shagged. I'll be getting a replacement 33gtr S2 box but I sure as hell won't be using anything that looks like smurf diarrhea to lubricate it...

-D

I'm just sick of alot of people puttin in their 20cents worth without any clue wtf their talkin about...

Helping for the sake of helping, It's not helping if it's incorrect information..could cost someone an arm and a leg.

This is not directed at the REDLINE argument lol

7 Litres! lol

Edited by Ryanrb25
I'm just sick of alot of people puttin in their 20cents worth without any clue wtf their talkin about...

Helping for the sake of helping, It's not helping if it's incorrect information..could cost someone an arm and a leg.

This is not directed at the REDLINE argument lol

7 Litres! lol

AGREED!!!! I bet 50% of the people on here havent even got their hands dirty once while working on a car..... and go by what the twit at their local autobarn (who also has no idea about cars) advises to use... then further along that word gets passed along to more unsuspecting and out the know people as gospel...

WE WANNA SEE PROOF PEOPLE!!!!!

Sorry bout ya car craig :) know ya loved that thing, but like steve said, good thing nothing like that happened when it was yours - but then again you prob wouldnt of been driving like a dickhead like he was. Ahhh well.

Did you get awesomely drunk last night? bahaha :banana:

So in other words it doesn't damage your box any more than conventional lubricants, it just stops you from hearing your damaged box.

I'm not sure about that; for a definitive answer I'd have to run scientific tests, requiring brand new boxes and a sampling distribution of at least a dozen cars ;P

However I wonder if the viscosity and pressure differences might prevent the synchro from aligning correctly and then causing the problem. The main thing I see as being a downside with a synchro crunch you cant feel is that u cant adjust your shifting to compensate (ie meaty fist vs letting the gears slide in). On an 18 year old box like mine, theres no definitive answer but I really do trust my mechanics word.

-D

Generally excessive pressures can cause pitting to increase in alot of cases, Thicker oils tightens tolerances etc...I'm no expert but a car gearbox gets jerked back and forth alot which you'd think a thicker oil would stop alot of shock value in the backlash. But at the same time, The thicker oil, wouldn't create a higher pressure between the gears creating an increase in pitting/wear etc..At the end of the day, the harder you smash gears, the more power you place through a box the higher the pressure, the more wear anyway. Nothing stops age and wear and tear destroying a box, It's self distructing from day 1 as the case hardening slowly wears through into the gears. Most of the boxes we use, the damage has been done.

I hope that made any sense at all

Edited by Ryanrb25
well, i got a msg from damo friday arvo, pretty much telling me he seen

a 33 very similar to my old one, on the back of a tow truck, in bad shape....

so

i msged the young fella that bought it, and asked how its going blah blah and i got spares for it blah blah

no reply :banana:

and last night, got a phone call from my mate, telling me he seen a black 33 on the back of a truck

on friday night, all smashed up, badly, amd he is 99% sure it was my old one :)

what a dick head.

im pretty devo, but oh wells. i still got the money from it atleast.

I dunno man, it looked like yours, but definately had Koya rims, im 100% on that.

I hope that made any sense at all

Yeah it made perfect sense. I suppose thats why if you have shockproof and you shift like a ham fisted git then you might have some problems.... but if u drive it normally, maybe it'll be fine? Not sure eh... we need 10 people to get rebuilds and volunteer so we can test the theory (and write this clause where we both dont pay for damages haha)

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...