Jump to content
SAU Community

Recommended Posts

haha, that's great.

When I worked at Adelaide Engine we used to sell second hand Scania & Volvo pistions for $20 as they made great ashtrays (ie. the combustion chamber is built into the top of the piston).

SLED, spoke to a good friend of mine tonight who is a tech at toyota, There is a recall on the 200. The vaccumm pump accumulator valve opens far too much causing the motor to burn excessive oil...This can be fixed with a simple flash of the ecm. Toyota do it on warrentee, Also if you get a spungy brake pedal it's because the Diaphram in the master cylinder has a slit in it rather than a hole..hard to explain over the net. But Minor things and will be fixed for free.

So many lines up for grabs these days! Infact, even I'm barely keeping hold of the GTR. Still up in the air about if I'll sell it, or keep it...

If my $ improves, then I'll keep it for another year!

haha im in the exact same sittuation, gotta figure out what i wanna do before the years insurance is up. very very tempted to go down the chaser route

^ i know you guys are confused now so im going to pretend you didnt just say that :(

godzilla can not be replaced by some sort of "chaser" possible meaning to the name lagging behind :D

and pete keep your damn hands off mine :( and if you mod a vspec 2 32 there will be some gheto like behaviour out of me

Edited by Inline 6
SLED, spoke to a good friend of mine tonight who is a tech at toyota, There is a recall on the 200. The vaccumm pump accumulator valve opens far too much causing the motor to burn excessive oil...This can be fixed with a simple flash of the ecm. Toyota do it on warrentee, Also if you get a spungy brake pedal it's because the Diaphram in the master cylinder has a slit in it rather than a hole..hard to explain over the net. But Minor things and will be fixed for free.

ah, thanks for the heads up.........I'll print this out and point these things out when I get the service done :(

but seriously mang, your money, your choice, no point the whole of SAU telling u to get volks, and you wishing for the rest of your rim ownership that u got gtr's... maybe you can get gtr and spend 600 on brakes? id go gtr and rotor upgrade over the 37's.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...