Jump to content
SAU Community

Recommended Posts

I bought a used 3000km old Tomei fuel pump for my r32gtst.

Looking at the Tomei site it appears to be the correct one, part no. 183001 but this part no. isn't on the pump.

I was a bit surprised to see the Nissan emblem on it even though I didn't really expect to see Tomei on it.

post-13288-1192264845_thumb.jpgpost-13288-1192265117_thumb.jpgpost-13288-1192265280_thumb.jpg

It's marked Unisia Jecs A42-621B70

I found a pic of a bnr32/Z32 fuelpump and I can actually make out the same model no. on it.

The R32gtst Nismo pump is the same also.

It seems as though they are all the same pump so I don't care if mine actually came from Tomei or not.

My only concern is how it fits up.

The Tomei kit doesn't come with the clamp or extra regulator thingy that can be seen in the first pic but they were there in the bnr32/Z32 pics.

Are they needed for the r32gtst?

The Tomei kit comes with a spacer and cushion and I did not get these with my pump.

Do I need them for a drop in fit?

Can someone please shed some light on this?

Link to comment
https://www.sau.com.au/forums/topic/189139-tomei-hcr32-fuel-pump/
Share on other sites

Another thing that puzzles me is if the tomei gtst pump is the same pump as a std gtr how come they rate the tomei gtst pump at 248L/hr and rate the std gtr pump as 195L/hr?

r32 gtst tomei pump: http://www.nengun.com/tomei/fuel-pump-niss...yline-r32-gts-t

r32 gtr tomei pump: http://www.nengun.com/tomei/fuel-pump-nissan-skyline-r32-gtr

Maybe they just look the same.

Does anyone know the model no. from the tomei r32 gtst pump for certain?

i have bought a few TOMEI pumps over the years and have one in our current S13/26 and it definately came with reg/damper and all associated mounting hardware.

I'm now pretty sure my pump didn't come from a tomei kit.

From the gtst nengun link in my last post it appears the tomei kit doesn't contain the regulator/damper thingy that came with the pump I bought. (Check pic in first post)

Tomei obviously don't think it's needed.

What does it do?

My pump didn't come with the cushion and spacer seen in the tomei kit.

I've ordered the cushion from Nissan as a genuine gtr part.

I think the spacer is made by tomei as a gtst adapter so I guess I'll have to make my own.

  • 3 weeks later...

Given that all evidence points to the r32gtr pump and the tomei gtst pump being identical why are they rated differently?

Another thing that puzzles me is if the tomei gtst pump is the same pump as a std gtr how come they rate the tomei gtst pump at 248L/hr and rate the std gtr pump as 195L/hr?

r32 gtst tomei pump: http://www.nengun.com/tomei/fuel-pump-niss...yline-r32-gts-t

r32 gtr tomei pump: http://www.nengun.com/tomei/fuel-pump-nissan-skyline-r32-gtr

Maybe they just look the same.

Does anyone know the model no. from the tomei r32 gtst pump for certain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...