Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

i would probably guess around 8ish but i can probably confirm tomorrow...hopefully my car is back on the road by then

Crikey thats early! We'll be in Bathurst before 11!

Perhaps slightly later? 9 for 9:30 leave or 9.30 for 10am Leave?

Anyone checked the Bathurst light car club website?

Crikey thats early! We'll be in Bathurst before 11!

Perhaps slightly later? 9 for 9:30 leave or 9.30 for 10am Leave?

Anyone checked the Bathurst light car club website?

that was just a rough time mate. it'll probably change to about 9:30 leave

good good! lol Ed & I will be coming from Orange! few of the NS guys seem keen too...

checked the BLCC, doesnt seem to be much on, their last stuff is on the weekdn of the 8th/9th... however last time we checked the website (before the 31 cruise) they had nothing on (nor did Mt Panoramas official calender!)

good good! lol Ed & I will be coming from Orange! few of the NS guys seem keen too...

checked the BLCC, doesnt seem to be much on, their last stuff is on the weekdn of the 8th/9th... however last time we checked the website (before the 31 cruise) they had nothing on (nor did Mt Panoramas official calender!)

haha yeah i organised the thread on NS...lol...

yeah it seems like so far it should be a good cruise..so far i've estimated about 20 people have said they should be there but i think there's only a few that have said they will be there

um..not really..i mean i'm going down there for family and just figured i might as well try and organise a cruise on the way... :nyaanyaa:

but yeah i apologised for the earliness...i know its probably gonna turn ALOT of people off it..but i thought i'd try

I'm in.... got half a dozen mates at this stage who are gunna tag along... we will leave bathurst and m,eet up with you somewhere along bells line

Is it definatly this saturday (15/12)?????

yeah mate it is definitely this saturday 15/12

I'm keen to meet up with you guys once you get to Mt Panorama, but I don't really have time or $$ to drive into the mountains just to drive back.

What's the proposed meet time once you get here, or is that dependant on the travel time?

Also you should probably note this is the same day as the SAU NSW Christmas Cruise, as it was postponed from last weekend to this one de to rain.

I wont be able to make it. It's a good cruise though!!

Be careful when driving on the track, as Im sure you're aware there are a lot of police radar's. A friend of mine was booked on a recent WRX cruise there.

Have a good day guys :-)

I'm keen to meet up with you guys once you get to Mt Panorama, but I don't really have time or $$ to drive into the mountains just to drive back.

What's the proposed meet time once you get here, or is that dependant on the travel time?

Also you should probably note this is the same day as the SAU NSW Christmas Cruise, as it was postponed from last weekend to this one de to rain.

dude i think it depends on travel time..i'd estimate maybe between 10:30-11. if u want my number is 0410-803-199. I can msg u when we get close?

I wont be able to make it. It's a good cruise though!!

Be careful when driving on the track, as Im sure you're aware there are a lot of police radar's. A friend of mine was booked on a recent WRX cruise there.

Have a good day guys :-)

yeah the mount sucks for cops. i used to live in bathurst so i know all about them, unless they've changed they're strategies i know where they sit

dude i think it depends on travel time..i'd estimate maybe between 10:30-11. if u want my number is 0410-803-199. I can msg u when we get close?

Sweet, I'll just hang about until you show up, not much else to do in Bathurst on a saturday morning.

Be wary of cops, but you shouldn't need to avoid them unless you do something stupid. if you go for laps of the mount, keep it at 60 and just enjoy the drive.

Sweet, I'll just hang about until you show up, not much else to do in Bathurst on a saturday morning.

Be wary of cops, but you shouldn't need to avoid them unless you do something stupid. if you go for laps of the mount, keep it at 60 and just enjoy the drive.

i know all about the cops on the mount lol..having lived there for 19 years...they always used to sit behind the wall in the chase? do they still do that?

I wont be able to make it. It's a good cruise though!!

Be careful when driving on the track, as Im sure you're aware there are a lot of police radar's. A friend of mine was booked on a recent WRX cruise there.

Have a good day guys :-)

BTW **Miss Rexy** i work for subaru, i love that shaped rex!!!! looks big bulky, and like it would eat someone!!!!

Edited by NG0387
i know all about the cops on the mount lol..having lived there for 19 years...they always used to sit behind the wall in the chase? do they still do that?

As far s I'm aware they do, but I haven't eally been into cruising for a while, so i wouldn't know.




  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...