Jump to content
SAU Community

R33 Gts-t Rear Hand Brake, Something Not Right

PT
 Share

Recommended Posts

PT Community Regular

PT

Posted
Posted (edited)

I am about to upgrade front/rear brakes on my S15 to those off an R33 gts-t, donor vehicle in question has had front end collision and swung round a bit, only damage after the firewall is a small dent in the right rear rim, all the arms look straight on this side.

Now problem is with the donor vehicle jacked up and handbrake fully applied there is ~15 degrees of free play in the hub/rim on the right hand side (left side has no free play whatsoever), the right wheel will rotate a bit before being "locked" this doesn't seem right to me. Anyone have similar issues in the past as i don't think this is normal??

I know it is a drum brake for the handbrake but tried pumping brake pedal then reapplying handbrake and made no difference, I have not pulled the disc off or inspected the hub yet, there is no brake fluid leak or anything like that

Edited by PT
BHDave Grand Master

BHDave

Posted
Posted

pumping the brake will have no effect on the hand brake mechanism. They are not connected at all.

But no, what you are describing doesn't sound normal. Best to remove the rotor and check the operation of the brake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Boost cut after swap(RB25DET NEO) R34

      By Kinkstaah · Posted

      I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Kinkstaah
      Boost cut after swap(RB25DET NEO) R34

      By Kinkstaah · Posted

      Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...