Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 3 weeks later...

To all people that were thinking about buying this turbo

Count your lucky stars you didnt .

The Seller claimed approx 4000kms Like new GCG High Flow R33 Turbo 1500 bucks or somewhere thereabouts

I messaged this fella and of course asked about shaft play, He claimed NONE i figured this was a fair claim when its done less than 5000ks

I payed him the 1300 bucks after looking at some pics and figured it looked the goods keeping in mind 5000ks no shaft play bonza i thought, been waiting 2 years to upgrade the turbo its all happening .

anyway the turbo arrives i open the box and have a squiz inspect exhaust wheel all good there , XTR actuator good , ispect the compressor wheel and housing inlet Hmm , Scores on the inlet where the compressor wheel as made contact with the housing while spinning NOT GOOD , then i figured how could this be with no shaft play????

checked the shaft play and well well well what do ya know about 1.5mm 2mm of play in and out on the shaft (causing the contact with wheel and housing) and side to side bearing play well and truly over the 1mm tolerence that GCG told me there is for expansion when warmed up .

To top it all off it smokes it tits off make an un earthly noise when coming up over 5psi and is basicly sh|t

This is how the topic should have read

GCG High Flow R33 Turbo , Some shaft play , blown hotside seal, does work but will require rebuild $900

lesson learned

Cheers

It sure does suck :-(

I cant get the guy to answer an email so looks like he's a stooge

think im gonna sell my car im just over being ripped off by everyone

I loved my fat 33 but the love is gone

why cant people be honest im so broke coz if this turbo already now im gonna have to fork out to rebuild it

cheers Robbo33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...