Jump to content
SAU Community

Ticking Noise - Possible Manifold Leak?

Black Widow

By Black Widow,
in General Automotive Discussion

 Share

Recommended Posts

Black Widow Veteran

Black Widow

Posted
Posted

hey guys, just thought i'd ask, i've noticed sometimes when i'm driving my car there is an evident ticking noise its only when i put my foot on the accelerator. but it is only intermittent, for example driving to work today it happened until i got to the servo, i turned the car off and went inside, i came out and turned it back on and nothing. but then when i was almost at work it started again. Would this be a leaking manifold?

OZ_Pomy Rising Star

OZ_Pomy

Posted
Posted

i had a ticking noise aswell awhile back turned out afew of my exhaust manifold studs were snapped and the gasket had split and was creating a ticking noise. Replaced studs and gasket all is good now.

TTT Grand Master

TTT

Posted
Posted

an exhaust leak would be more obvious when cold.

the metal (manifld, gaskets etc) all expand a little with heat and the exhaust leak will not be as noticible and if small enough, not there at all.

then you will hear it again after the car has cooled a little and you turn it back on.

since your one came back later in the drive like when you were near work, I'd say it's something other than a leak.

also, if it had a small leak to cause a ticking on idle, it would mean that you would hear a really loud shreeking screaming sound when on boost as it will really leak from there.

does the ticking increase a decrease with revs?

as in tick tick at idle becomes a faster ticking at say 2000rpm?

It sounds like a/the lifter/s to me.

search for "ticking lifters" maybe something will come up.

they can be removed and serviced but I don't think it's easy

TTT Grand Master

TTT

Posted
Posted

well if the exhaust all of a sudden got really loud and struggled and no boost etc I'd say that you should at least visually check and feel that all the bolts are on the manifold to block and turbo to manifold and turbo to dump pipe.

If you lost all boost and got really loud, I'd take a guess that the manifold to block connection is fubar.

this would mean.. no exhaust gasses to turbo = no boost.

exhaust gasses escaping between block and exhaust manifold and not getting to turbo and exhaust would mean all that sound escaping without any muffling = loud exhaust sound.

there is a heat shield and stuff in the way so you won't be able to check it too easily without removing the heat shield (only a few bolts of which most bolts will break off)

I can't remember how many bolts/nuts there are for the manifold to block connection.

search for pics of RB20/25 manifold and you should be able to see how many holes there are and therefore how many bolts you were supposed to have.

the manifold might even be cracked..

OBVIOUS NOTE: if you are going to remove any bolts from that area.

1.) do it when the motor is cold.

2.) spray ALOT of wd40 on to all the bolts the night before you work on it and keep spraying some the next day when you want to remove the bolts. it will help them come off a little easier (still bloody hard though).

3.) Keep tissues, detol and banaids near by for your knuckles.

inthisglass Grand Master

inthisglass

Posted
Posted

It probably is the manifold as you described the no boost and loud exhaust but also have a look at the gears on the front of your engine.

my car would some times make a ticking noise and then stop and then come back from time to time.

It turned out the bearing of my idler gear had gone and was only being held in place by the tention of the belt.

and +1 for the looking out for you knuckles. Those bolts are a bitch and you end up punching your engine a few times when they suddenly loosen or snap.

good luck anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...