Jump to content
SAU Community

Recommended Posts

OKay before you guys start on the BOV jokes lol theres a really weird noise coming from my r33 upon start up thats got me a lil worried.

Anyways to fill you in I took the car on a lil bit of a drive the other night through the dandedongs and what not and well essentially gave her a decent work out..

Anyways only since then I've heard what appears to be the sound of air escaping (loud like trucks air brakes loud) upon starting the car and beginning to drive this usually happens when the car has just started in motion, and has occured whilst driving or in reverse..the noise only happens the once and if I turn the car off and on it won't do it.. I guess it only really occurs after its been sitting for a while.. Does anyone have any ideas??

To me it sounds like some sort of pressure release but for the life of me I have no idea why...THANKS in advance.

Link to comment
https://www.sau.com.au/forums/topic/190488-weird-sound-from-my-r33/
Share on other sites

Iv come accross that also, i notice a loud hissing when i pull into garage afta goin for a spin, i checked all my vaccum lines n everythn cudnt hear or feel any air escaping. I rekon its my fan or something around that area? Are you boosting ok n does it idle normaly?

Boost fine and idle hasnt change.. it doesnt do it under load and only does it like the once on start up today I left it to idle for 15minutes before I took it for a drive and it only made the noise as I reversed from the driveway..

I would but its a kind of hard thing to explain when the car only does it sometimes on start up.. and I dont even know where the sound comes from if you get what I mean... Thats why I thought I'd ask on here first incase and of you guys had experienced a similar problem..

sounds like wat my bros 34 GT did

only on startup it would make some kind of hissing noise for a few seconds then that was it

he changed the oil, which by the looks of it had never been changed by the previous owner

and its was all fine hasnt made it since.

thanks guys ill try kinda hard when it only does it occasionally but ill try.. it literally sound like airbrakes going off on a truck (that kinda high pitched hiss) and happens from the front of the vehicle.. it hasnt done it yet today..but probably will tonight its really weird lol theres no like pressure release system built in anywhere ive never heard of is there??

im not sure too but since the car was sitting ideling this morning i've kinda been thinking it might be coming from the steering somewhere...since it didnt happen on idle.. maybe it when i turn the wheel for the first time??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...