R32gtst Problems, What Am I Getting Myself Into?

[Boro style]

Hi all first post, iv been a long times 180sx owner and have decided to jump ship into a skyline after sampling some RB insanity in a mates GTR. Im after a 32 gtst with basic bolt on mods for around 11000. Hoping to aim for around 220rwkw with bolt on low mount and am aiming for maximum response. I honestly have very little experience with RB20's and anything to do with these cars. Any helpful comments would be much appreciated as id like to know what im getting into and what parts to use to achieve this figure. Thanks all im sure this has been answered before but just throwing it out there.

[TTT]

should be achievable under $5K.

hiflow turbo - GCG would be most expensive at about $2K or cheaper is HERE.. about $1500 for a whole KIT of manifold, turbo etc..

fuel pump - GTR, Bosch, Walbro

fuel injectors - GTR 444s with a GTR ballast to make them work

fmic - Just jap kit will do fine, or GTR one.

turbo back exhaust with seperate wastegate pipe - take a pick fro many options... Just jap/otomoto type ones are cheap and good enough for that power.

Z32 AFM - $300

ECU - rechip or stand alone ecu (speak to user CEFFIE from these forums re: rechip)

boost - probably about 16-18psi (Turbo tech bleed valve = $50 or electronic ones start at about $200)

tuning - anywhere from $300 +

that should give you a resposive rb20 with about 220+rwkw

now prepare another $5K for brakes, clutch, tyres, suspension