Jump to content
SAU Community

Recommended Posts

hey ppls

wheres the boost restrictor in a 33 gtr ? i just wana see if its still there. From my searching i think im looking for a pipe with a yellow ring around it.. ? and its meant to be near the strut / pcm valve thingy ?

cause ya i dont see anything in that area or anywhere that looks like a boost solenoid (like a gtst one im assuming).

i can see 2 pipes with yellow rings but there going into the fuel stuff so i dont think its them.

ive attached a pic :)

thanks

post-19018-1194522570_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/192848-r33-gtr-boost-restrictor/
Share on other sites

Just wondering what you mean by boost restrictor? Also wondering what that "PCM valve" is. I thought that valve was the factory boost control solenoid. The reason I ask is because I am not running it anymore and it seems like my 26 is overboosting. It will easily boost past 14 psi and I dont know where it would stop since I have been taking it easy since i noticed it. Just wondering if there is any connection or if one or both of my wastegates is just messed up. Not trying to thread jack just trying to get some info. Any help would be great.

im not 100% either but there meant to run a stock solenoid to control the boost. and i think theres a little restrictor thingy in one of the pipes.

the thing the left of the fuel filter ses "pcm" on it.. dunno wat it does tho..

hey ppls

wheres the boost restrictor in a 33 gtr ? i just wana see if its still there. From my searching i think im looking for a pipe with a yellow ring around it.. ? and its meant to be near the strut / pcm valve thingy ?

cause ya i dont see anything in that area or anywhere that looks like a boost solenoid (like a gtst one im assuming).

i can see 2 pipes with yellow rings but there going into the fuel stuff so i dont think its them.

ive attached a pic :thumbsup:

thanks

Go to your boost control solenoid - the cylinder laying on its side with the gold band and mount near your drivers side strut tower. Pull back the protective cover on the pipe going towards the front of the car attached to the top of the boost control solenoid.

If you feel down that pipe about 50mm you should feel a hard section near the yellow painted ring. There's the restrictor.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...