Jump to content
SAU Community

Recommended Posts

skyline

good - a better daily driven car, more comfortable and refinement. better off boost power due to 2.5L and big brakes.

bad - heavy, higher maintenance, had to spend more on mod if u want to go REALLY serious.

180

good - better handling, touch faster, u won't see many around.

bad - noisey, roomy.

i upgrade from silvia to r33 as i think silvia is too small for me(me,gf & sister) and it's damn noisey, not good for daily driving.

but as my gf & sister got the own car now, i would like to go back to silvia(S15) as it's cheap to reach my aim of performance(low 12sec car)

Originally posted by strange

hi guys, considering whether to buy a strawberry face 180 or Skyline R33 GTSt series II, but can't really decide, somebody explain the pros and cons of these 2 in your own opinion? Thanks in advanced..

Cheers!

And you are on a Skyline forum asking this ??

Cheers

Ken

I used to have a strawberry face... jus the look on ppls faces when you tell em its a harchback 200sx is enuff in itself.

R33's are as common as camries, get sumfin different. I got my CA18DET 180 for $13k (like 3 yrs ago) and then got a bomex kit from japan for about 4k (from a wrecker) bit of patch up etc shipping and for around 19k I was pushin a pimped up car.

As far as pros n cons, the GTSt is more up to date, seriousy the interior of a 180 sux dogs bollox, so uncomfortable, the seats are shit (had fake recaro's in mine but i'm talkin bout the stock ones). All the controls are on stalks like really old outdated 1988 cars (even the R32 din have them).

So yeah, if you're after creature comforts get an R33 its the biggest whale... i mean car as far as 2 door under 1.3tonne imports go. :)

If you're more of a mods person, get an latemodel 180sx with a black top SR20DET in it, it'll give you the most bang for buck... more than an R33. it really responds well to mods as well. I pulled 160rwkw out of my 1.8L, so meh.

Originally posted by Maxx

skyline  

good - a better daily driven car, more comfortable and refinement. better off boost power due to 2.5L and big brakes.

bad - heavy, higher maintenance, had to spend more on mod if u want to go REALLY serious.

180  

good - better handling, touch faster, u won't see many around.

bad - noisey, roomy.

i upgrade from silvia to r33 as i think silvia is too small for me(me,gf & sister) and it's damn noisey, not good for daily driving.

but as my gf & sister got the own car now, i would like to go back to silvia(S15) as it's cheap to reach my aim of performance(low 12sec car)

thanks for the info dude.. :(

Originally posted by funkymonkey

I used to have a strawberry face... jus the look on ppls faces when you tell em its a harchback 200sx is enuff in itself.

R33's are as common as camries, get sumfin different. I got my CA18DET 180 for $13k (like 3 yrs ago) and then got a bomex kit from japan for about 4k (from a wrecker) bit of patch up etc shipping and for around 19k I was pushin a pimped up car.

As far as pros n cons, the GTSt is more up to date, seriousy the interior of a 180 sux dogs bollox, so uncomfortable, the seats are shit (had fake recaro's in mine but i'm talkin bout the stock ones). All the controls are on stalks like really old outdated 1988 cars (even the R32 din have them).

So yeah, if you're after creature comforts get an R33 its the biggest whale... i mean car as far as 2 door under 1.3tonne imports go. :D

If you're more of a mods person, get an latemodel 180sx with a black top SR20DET in it, it'll give you the most bang for buck... more than an R33. it really responds well to mods as well. I pulled 160rwkw out of my 1.8L, so meh.

the bomex kits are really nice... and ya, the interior for 180s really sxxk big time.. :(:D:mad: :mad: :mad:

BTW, i found my bomex kit at a wrecker on a strawberry face silvia that was written off. Pure luck if u ask me. An original bomex will cost ya about 9grand.

You can get fibreglass copies n aus now tho for about 4k-5k, with all the ichi-go kits (strawberry faces) that come down here. I know Skyline Imports in Adelaide got one about a month before I got mine back then, I'm sure they still have the moulds.

awesome! are there many of these around? or would u have to do the conversion urself and or import one?? that sounds wicked!! im contemplating a new car but i really dont want to sell my baby.

not that i know of, dude.. there's only one in perth that i saw... which is show cased in one of the garages.. i'm not really sure how or whereabouts doing the conversion itself.. but i do know there are people over at japan doing conversions for ichigoes =P

its actually a kit that was made by bomex, but not sold commercially in mass quantities, to keep its uniqueness.

Its basically the next version of the "sileighty" look.

The panels all fit a 180/silvia very snugly... all you need to do is chop a lil bit of the front bar support off (with your friendly angle grinder) and the rest bolts into place.

In the kit you get:

2 front guards that sit on the 180 chassis and flow into the existing doors and a pillar shape.

2 original s15 headlights

1 fibreglass bonnet also in the s15 shape but with a lil bit of bracket and mounting work under to fit the 180 chassis.

The front bar actually comes seperate, but you can source it from them if you want.

i got pics for the install process if u guys want

my local panel beater fixed up the dents in my kit and installed it on my 180 for me. Mine was like the 7th in australia or sumfin. God knows how many there are now with couple of the shops making fibreglass moulds of the original bomex kit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...