Jump to content
SAU Community

Recommended Posts

bought a set of ohlins adjustable height coil overs that i was told were for my r33. fronts fitted fine, backs did not so i emailed ohlins suspension and it turns out they are suited to an r32.

shocks are adjustable bump and rebound and anyone that knows the quality and price of ohlins gear will know what im talking about when i say these are the ducks guts of suspension.

i am wanting to keep the fronts but will sell the rears.

think they are around 5-6 years old but are in good condition, they use a sirclip to adjust height.

after somewhere around $300 for em.

cheers guys

brett

Link to comment
https://www.sau.com.au/forums/topic/194491-ohlins-adjustable-hight-coil-overs/
Share on other sites

What does the bottom mount look like?

Any pics.

And do they come with springs?

If they fit an r32 gtst consider them sold!!!!!

I can pickup on weekend.

Edited by _x_FiReStOrM_x_

pm sent rad33. they definetly fit an r32 gtst. i emailed ohlins in sweeden and gave them part numbers. the front ones fitted my 33 but backs were too short. bottoms of em just have the bolt hole that goes through the bottom of your standard shock so can be changed over in bout 45 mins! they also have a screw and nut at bottom of shock that adjusts the rebound level (i think). i can organise to send some pics through tomorrow night if need be!

brett

and yeah they come with springs, just need the rubber outta the top of your standard ones put into these and will be ready to roll.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...