Jump to content
SAU Community

"ohlins" Adjustable Hight Coil Overs

black_gtst
 Share

Recommended Posts

black_gtst Proficient

black_gtst

Posted
Posted

bought a set of ohlins adjustable height coil overs that i was told were for my r33. fronts fitted fine, backs did not so i emailed ohlins suspension and it turns out they are suited to an r32.

shocks are adjustable bump and rebound and anyone that knows the quality and price of ohlins gear will know what im talking about when i say these are the ducks guts of suspension.

i am wanting to keep the fronts but will sell the rears.

think they are around 5-6 years old but are in good condition, they use a sirclip to adjust height.

after somewhere around $300 for em.

cheers guys

brett

Link to comment
https://www.sau.com.au/forums/topic/194491-ohlins-adjustable-hight-coil-overs/
Share on other sites
_x_FiReStOrM_x_ Community Regular

_x_FiReStOrM_x_

Posted
Posted (edited)

What does the bottom mount look like?

Any pics.

And do they come with springs?

If they fit an r32 gtst consider them sold!!!!!

I can pickup on weekend.

Edited by _x_FiReStOrM_x_
black_gtst Proficient

black_gtst

Posted
  • Author
Posted

pm sent rad33. they definetly fit an r32 gtst. i emailed ohlins in sweeden and gave them part numbers. the front ones fitted my 33 but backs were too short. bottoms of em just have the bolt hole that goes through the bottom of your standard shock so can be changed over in bout 45 mins! they also have a screw and nut at bottom of shock that adjusts the rebound level (i think). i can organise to send some pics through tomorrow night if need be!

brett

black_gtst Proficient

black_gtst

Posted
  • Author
Posted

and yeah they come with springs, just need the rubber outta the top of your standard ones put into these and will be ready to roll.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

      And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...