Jump to content
SAU Community

Recommended Posts

Hi,

At the moment the bass level in my car is ok but i want a bit more punch i was thinking of upgrading my monoblock amp but im not 100% sure.

Any direction would be appreciated

Pioneer DEX-P88R Headunit

Pioneer DEQ-9200 DSP Audio Processor

Pioneer TSW121SPL Subwoofer x2

Pioneer GDM510M Amplifier

Pioneer 4 Channel amp cant remember the model

Pioneer TS-D161S Splits

Alpine Type R tweeters

Lee

Link to comment
https://www.sau.com.au/forums/topic/194593-i-want-a-bit-more-punch-in-my-bass/
Share on other sites

Hi,

At the moment the bass level in my car is ok but i want a bit more punch i was thinking of upgrading my monoblock amp but im not 100% sure.

Any direction would be appreciated

Pioneer DEX-P88R Headunit

Pioneer DEQ-9200 DSP Audio Processor

Pioneer TSW121SPL Subwoofer x2

Pioneer GDM510M Amplifier

Pioneer 4 Channel amp cant remember the model

Pioneer TS-D161S Splits

Alpine Type R tweeters

Lee

you got all this in your R33 and you want more bass?? what kind of enclosure do you have for the two 12's?

  • 3 months later...
you got all this in your R33 and you want more bass?? what kind of enclosure do you have for the two 12's?

As above, what type of enclosure do you have for the two 12" subs - you may have serious "suck out" where the ouput from each is cancelling the other.

Try switching the phase on one of the subs and see if it makes it better or worse.

  • 2 weeks later...

Thanks for the comments but i ended up just spending a bit of time tuning the different eq maps with all sorts of types of music and i ended up with a good result without having to spend any $ which is good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...