Jump to content
SAU Community

Recommended Posts

the wide body r33 with an r34 gtr front end was all custom from jspec, superb work done there with alot of attention to detail. at the end for the labour and repray (minus part prices) it cost him around $17k!

i myself am getting custom gaurds done to the r34 later on to fit the wheels i end up with perfectly. have a call around to different panel beaters and get quotes.

cheers.

the wide body r33 with an r34 gtr front end was all custom from jspec, superb work done there with alot of attention to detail. at the end for the labour and repray (minus part prices) it cost him around $17k!

i myself am getting custom gaurds done to the r34 later on to fit the wheels i end up with perfectly. have a call around to different panel beaters and get quotes.

cheers.

he got shafted, we got the genuine uras R33-34 guards on the shelf.... most of our customers end up with a show quality conversion for about 3k. The gaurds are only about 600-650

  • 2 weeks later...

Yeah heaps of people, you can get bolt on kits or fibreglass ones which you'll need custom fitted and painted etc.. flush mounted ;)

Dunno where to get them however did seem them for sale recently on the for sale forums

we have sold heaps of fronts R33 wide R34 wide and R33 to R34 conversion. We only have wide rears for 4door though ATM i will be sourcing 2door rears in januarry while in japan... we will then have stock in aus.

for all the other front gaurds check out the bodykit page http://www.uras.com.au/syohin/syohin_aero.html

  • 7 months later...

hey all old thread ive brang up i just recently picked up GTR style widebody gaurds for the gtt both front and rear gaurds was just wondering would i need a GTR body kit now instead of a GTT? heres some pics of the gaurds havent got a chance to get pics of the gaurds lined upto the car

Edited by mrgtt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...