Jump to content
SAU Community

Recommended Posts

well here is a small comparison.

running exaclty the same still using the afm's for now (only for sake of comparison will be swapped out straight after) same filter everything.

this red line is the pfc (tuned by P.I.T.S) and the blue is the wolf v500 tune, which is not finished yet there is still a little way to go and to sought out why the power is dropping down so early. going to play with the timing and look at it possibly blowing out the spark (splitfire coils with 1.1mm plug gap)

throttle response is noticably better with a much smoother running motor. same power so far but it is coming on a lot earlier.

one issue my mechanic has noticed is it was running a bit rough (barely) when using larger mapping points. so we have dropped the mapping points down to 125rpm increments. much smoother.

post your thought people.

p.s. sorry about the quality, dodgy phone camera. cause scanner isn't working.

post-30153-1195645978_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/194724-wolf-4500-vs-pfc/
Share on other sites

The ECU is only as good as its tuner. :bunny:

Is this on the same dyno? Same tuner? Same day?

I ask because if it isnt, then its pretty hard (and pointless) to compare tiny differences in graphs like that. :)

The variance between the (many) factors of the dyno settings, air temp settings, tune settings etc etc are going to be more of a factor than the ECU itself which then makes it hard to same one "vs" one, this is better.

Its probably a case of the tuner spent more time on the tune, or leaned a bit more on the set-up than anything else... and that's solely attributed to different tuners (and tunes themselves), not ECU's because no two tunes will be the same if your changed the whole management. There is bound to be tiny differences like in the graph :D

The ECU is only as good as its tuner. :bunny:

Is this on the same dyno? Same tuner? Same day?

I ask because if it isnt, then its pretty hard (and pointless) to compare tiny differences in graphs like that. :)

The variance between the (many) factors of the dyno settings, air temp settings, tune settings etc etc are going to be more of a factor than the ECU itself which then makes it hard to same one "vs" one, this is better.

Its probably a case of the tuner spent more time on the tune, or leaned a bit more on the set-up than anything else... and that's solely attributed to different tuners (and tunes themselves), not ECU's because no two tunes will be the same if your changed the whole management. There is bound to be tiny differences like in the graph :D

different tuner however same dyno but different days. and yes the tuner has put more time into it, just merely pointing out that there is the possibility of putting more time into it i.e using much closer mapping points (125rpm increments) doing things like running twin maps (a future plan) just thought i would post it up for the hell of it. however once the wolf v500 is fully tuned then i will do a back to back comparison run as both are plug and play.

still more than happy with the power coming on a bit earlier up top. and like i said throttle response is noticably better. but then again the wolf is a more expensive ecu.

If there is more timing in one of the tunes, therefore they are not "the same".

Of course one will make more power than the other at various points with more timing, and this will attribute to throttle response as well.0

Could also be that the part throttle mapping has also had some extra work.

My main point is exactly as my first line earlier, the ECU is only as good as its tuner.

You have different ECU's, different tunes and different tuners... i would only be surprised if the results were the same :D

yeah i suppose. just let me bask in my ignorance for a bit longer. still pretty good results. here's another sheet form this afternoon after a bit more fiddling. cars almost finished. bloody mechanic still fidling with the tune just to see how good he can get it.

still more than happy with the results. going to fiddle a little bit more and try to get the power coming on a little earlier.

another intresting note is that more timing was actually fed in at higher rpm's as opposed to the general rule of thumb, more boost less timing. (still nothing compared to a n/a motor)

post-30153-1195722004_thumb.jpg

well that was kinda the plan but yeah not now. pretty much decided i am happy enough with that figure to not bother toying anymore. get the car back either today or tomorrow so i can't wait to take her for a drive.

i know it's not really a direct comparison. but it does (kinda) show how much further you can go with a better ecu. horses for courses though the PFC is a fair bit cheaper and a lot easier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...