Jump to content
SAU Community

Recommended Posts

Hi guys,

Have a mildy modded 32gtr that im going to be hooking up an aftermarket boost gauge 2 as soon as it arrives, just a little unsure where to tap into. My ball/spring type bleeder gets its pressure feed from the vacuum line for the factory guage (off the back of the head going to that small black box). I know i can tap into this line but i'd rather another source, thought the ball spring type bleeder might effect readings or incase theres a small leak i'll have another boost readout.

Have read about people tapping into the fuel pressure reg line but i'd rather a line a little more out of site.

The factory boost solenoid is still connected (restrictor removed), will the line that had the restrictor in place provide an accurate reading? vacuum line to the carbon cannister?

I know this is something simple and have installed boost guages be4 but this car has that much wiring/lines i want to make sure i get it right.

thanx

Mike

Edited by Mike__
Link to comment
https://www.sau.com.au/forums/topic/194864-32gtr-boost-gauge-install/
Share on other sites

  • 5 weeks later...

i bought a blitz boost guage for my gtr i just tapped in to the fuel reg vacum line.Thats where blitz say to do it.I did it there n its been working perfect ever since

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...