Jump to content
SAU Community

Recommended Posts

forsale wrecked 1984 MR30 TI with a custom built L24ET in it. Car was one of a kind and mint until i hit a tree init im chasing $1700 but im open to offers any more questions dont hesitate to ask

im in adelaide south aus

http://pixpipeline.com/d/9b2391ab1e47.jpg

Hey Mate, Just wondering what you would want for the Engine setup from the car. Also could you describe how it has been setup ect.

Aswell as how many km's ect.

Cheers

Hey Mate, Just wondering what you would want for the Engine setup from the car. Also could you describe how it has been setup ect.

Aswell as how many km's ect.

Cheers

170,000km on the clock serviced every 5000km's its auto, got the manifolds off a l20et, a small front mount, a bov, and a rb25det turbo made 98.8kw and 290nm of torque with 2 in jectors that started leaking halfway throu the dyno run so that has been fixed and was running 10psiwhen i crashed it, so it hadnt been back on the dyno since then so i guess it would have made 115kw then, it also comes with a nismo works cam (not installed) so with that, 12psi, and a manual box 140kw would be fairly achievable also i found that there are little tin restrictors in the exhaust ports which were used for emmissions so if you pulled them out that would make a huge difference.

im only really wanting to sell it complete im bacicly chasing $1500 for the motor and $200 for the car the turbo gear cost me $2000 and took me 2 years to find the stuff but at this stage i will take offers

  • 2 months later...

hey mate i own a mr30 thats missing front passenger window do ya think ya got one also wondering if you still got the tailights want to change my standard mr30 ones for the dr30 look i think hotplates is what makes a skyline a skyline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
×
×
  • Create New...