Jump to content
SAU Community

Recommended Posts

Hey There

The other week i got pulled over and defected so im chasing down some standard parts. Does anyone in the northern suburbs preferably have front and rear springs to suit an r33 gtst series 1 and how much would you want for them? I will add more parts to this post as i go through the whole process. Also if anyone else has been through regency with an r33 can you please tell me what they looked over just so i can get a general idea of how much work i gota do.

Cheers Allan

Edited by iLEC
Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/
Share on other sites

Yeah mate i know they check everything lol but if we could put togethor a checklist maybe we could sticky it ontop of the page to help everyone so far i know you have to have

-Standard Turbo

-100mm ground clearance lowest point of the car

-r33 has to be 345mm high at the front 355mm at the rear

-no louder than 90 db

-Apparently a front mount and pod is ok if it doesnt go through a structual point of the car and pod is secure (this is what i got defected for induction) which regency say its not even a defect....

- No bleed valve, boost controllers

-Must have standard ECU

-Suspension Bushes mustnt be cracked or damaged

-Hicas lock bar are not allowed cuz its a welded suspension component

If anyone has failed the regency test which i gather isnt hard to do could you please post in hear what you needed to change to get through and we can add to the list. Also the regency inspection is now $132 and roughly a 1-2 week wait to get in. Any info posted in hear could go along way to help out alot of people as alot of people are getting defected lately.

Cheers iLEC

Edited by iLEC
Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3507913
Share on other sites

298 are u for real??

Hicas lock bar engineering is 250 from most automotive engineers on the list at regency.

Now im sad that my gtr is defected, going to cost more then i thought to goto regency :)

Also pods that are secure are fine and FMIC are fine but you cant cut bumper reinforcement.

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3507964
Share on other sites

So if you cant cut your reo bar, must mean most lines with fmic's are a defect. I dont even have a reo bar because of my 120mm thick intercooler. I was thinking of cutting one to fit but if this is still a defect no use doing it then.

<<<<<<

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3507968
Share on other sites

298 are u for real??

Hicas lock bar engineering is 250 from most automotive engineers on the list at regency.

Now im sad that my gtr is defected, going to cost more then i thought to goto regency :)

Also pods that are secure are fine and FMIC are fine but you cant cut bumper reinforcement.

I didnt think you can engineer your hicas lock bar?

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3507972
Share on other sites

Also the regency inspection is now $298 and roughly a 2 week wait to get in. Any info posted in hear could go along way to help out alot of people as alot of people are getting defected lately.

Cheers iLEC

its deffently not that much, its between 120-130bux first inspection and 70-80 for second

used to be 76 for the first inspection and like 45 for the second :s

damn government :)

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3508100
Share on other sites

Yeah mate i know they check everything lol but if we could put togethor a checklist maybe we could sticky it ontop of the page to help everyone so far i know you have to have

If anyone has failed the regency test which i gather isnt hard to do could you please post in hear what you needed to change to get through and we can add to the list. Also the regency inspection is now $298 and roughly a 2 week wait to get in. Any info posted in hear could go along way to help out alot of people as alot of people are getting defected lately.

Cheers iLEC

Fantastic idea guys......this is a really good thread that could save other unsuspecting defectees alot of cash and heartache.

So anyone with any experience with Regency and the processes involved to lift the defects need to be listed here.

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3508128
Share on other sites

I got defected for having a pod filter (which is secure) and for having a front mount intercooler. I rang regency they said it is NOT a defect unless the pod is not secure and if the fmic goes through a structual point of the car(the piping) its a defect which mine did not (cop obviously had no idea what he was on about) and when i rang regency they said it WILL cost $298 for first inspection and i questioned that they said the price went up about 10 months ago. From what i gather the cut reo bar is a definate defect but i have heard if they cant see it they wont pick on it........ i have had to cut mine to fit my fmic and new front bar so still undecided weather or not to change it as they wont be able to see it unless they take my front bar of. So has anyone got any standard 33 gtst series 1 springs i can buy lol.

Cheers iLEC

Edited by iLEC
Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3508295
Share on other sites

hey thats unlucky about a year ago i got defected only cost me 70 bucks,, um what i dont understand is the two things that were defected on your car are two legal things, so how come u didnt question it or do anything about it cause i actually think you would be able to get off this one.

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3508353
Share on other sites

I did ring up the police station after speaking to regency they said to bring it to your local cop shop and explain the situation and see what happens the only problem is the car is to low and to loud anyway and i have different turbo, ecu, bleedvalve..... so the car is defectable i just didnt get defected on what is actually defectable. So its not gona matter if i bring it to the cop shop cuz there just gona pick on the things thats defectable anyway(fair enough i guess) so im gona raise it and shut it up abit then take it to the cop shop and try my luck but i really think im just wasting my time. It just pisses me off that a coper can defect you when they clearly have no idea what the hell their on about.

Link to comment
https://www.sau.com.au/forums/topic/195891-been-defected/#findComment-3508477
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...