Jump to content
SAU Community

Recommended Posts

Selling on behalf of Marc (aka Optic 4ce). Most WA people will know him with the camo 180sx

Price: $1600

Cond: Good

Location: Perth (willing to send at buyers expense)

Details:

Turbo has been used on my car for the past 6 months for drifting and drag racing, it's an awesome unit and kicks like a mule when it comes onto boost. Car made 400.9hp on 22psi which is just coming into the efficiency for this unit, also comes onto boost around 4000rpm depending on setup (this is on an SR).

Turbo is the newest addition to the Garrett Ball Bearing Line up. It fills in the requirements for small displacement 4 cyl. engines and has a excellent response characteristics. It spools up 1,000 RPM sooner than the older GT30R. The Dual Ball Bearing GT3071R Turbo comes assembled with T3 style turbine housing with T3 inlet flange. Turbine housing style available in Standard GT or with T3/T4 Ford Style 5 bolt turbine housing. Compressor housing is T04E frame size with 2.00 outlet. Compressor inlet is available with 2.75 or 4.00 inlet.

PC080016.preview.JPG

IMG_2298.preview.JPG

Please contact Marc on 0404380960 or email optic_4ce at westnet.com.au

Edited by rinmak
Link to comment
https://www.sau.com.au/forums/topic/197172-fs-garret-gt3071r/
Share on other sites

  • 3 weeks later...

Mate not trying to give you a hard time to sell your item, but CRD is offering a BRAND new GT3071r for $1580. I'll give you 1200 for it unless what you're selling is different from them. If so then i do apologize. Cheers

*YaY*

Found my account details for these forums :)

The turbo is the same type as what CRD are selling but if you notice theirs are slightly different setup with internal gate, different exhaust bolt pattern and do not come with actuator (for the internal gate).

This turbo has T3 rear flange with 3” exhaust outlet and setup for 4 bolt dump pipe

Pretty much what there selling is the down graded version of this unit which you will then need to spend more on to get it working on your car.

BOZ22N: I'll get the cartridge number for you next week as the turbo is currently on Mandurah still bolted to my car :down:

External gate turbos are actually a little cheaper then the internal gate equivalent. Then you need to spend another $400-$900 for a good quality ext gate, not to mention more money for a manifold, etc.

External gate turbos are actually a little cheaper then the internal gate equivalent. Then you need to spend another $400-$900 for a good quality ext gate, not to mention more money for a manifold, etc.

exactly what I thought.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...