Jump to content
SAU Community

Recommended Posts

Hey,

Trying to find a R33 GTR to buy but cant find one in sa that apeals to me... but in queensland there is one that looks like what im after, even down to the colour and price (shit body kit on it tho!! lol)... Its just what has to be done to get rego on it here in SA? does it have to go through a full regency inspection?

The mods are

Garrett 400HP Turbo GT2860R x 2.

Sard 650CC injectors,

high volume Nismo Fuel Pump,

CES Ceramic coated dump pipes and secondary exhaust

80mm system with high flow CAT

Apexi Power FC with Hand Controller,

NI Water Pump.

Tomei Poncams Type "B" and Tomei adjustable timing gears

clear timing gear cover,

GFB Bleed Valve,

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment.

So the defectable things would be the turbos, Apexi power fc, tein suspension... that all?

Id have top change that to get redgo?

Link to comment
https://www.sau.com.au/forums/topic/197949-buying-interstate/
Share on other sites

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

so i dont even need to take it to regency?

when you say major defects, on that list is that just suspension and if i disconnect the power fc handcontrol that would be ok?

apart from that?

Going to the sturt shop is the same as going through the engine check section at regency. All the do is check the vehicle complies with the import thingo (plate) and the engine numbers match etc.

If u do get defected (when i should say) u will need to take off the AM parts anyway-

Garrett 400HP Turbo GT2860R x 2. - come off

Sard 650CC injectors, - come off

high volume Nismo Fuel Pump, -ok (IF its internally mounted)

CES Ceramic coated dump pipes and secondary exhaust - ok

80mm system with high flow CAT - ok (providing its less than the required Db)

Apexi Power FC with Hand Controller, - out (der)

NI Water Pump.- ok

Tomei Poncams Type "B" and Tomei adjustable timing gears - ok (as long as the cam gears are covered)

clear timing gear cover, -covers the last point ie get rid of it if u dont want an instant defect regardless...

GFB Bleed Valve, - off (its altering boost)

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment. - off

Basically they frown on anything that isnt std. So if yer buying the car fer all the bits, and end up taking them off later, is it worth the extra?

They can be engineered, but it will cost, and once again regency can say no they dont like it anyway (law unto themselves) and dont have to comply with any engineers report.

Edited by Bl4cK32
Going to the sturt shop is the same as going through the engine check section at regency. All the do is check the vehicle complies with the import thingo (plate) and the engine numbers match etc.

If u do get defected (when i should say) u will need to take off the AM parts anyway-

Garrett 400HP Turbo GT2860R x 2. - come off

Sard 650CC injectors, - come off

high volume Nismo Fuel Pump, -ok (IF its internally mounted)

CES Ceramic coated dump pipes and secondary exhaust - ok

80mm system with high flow CAT - ok (providing its less than the required Db)

Apexi Power FC with Hand Controller, - out (der)

NI Water Pump.- ok

Tomei Poncams Type "B" and Tomei adjustable timing gears - ok (as long as the cam gears are covered)

clear timing gear cover, -covers the last point ie get rid of it if u dont want an instant defect regardless...

GFB Bleed Valve, - off (its altering boost)

Tein Super Street fully adjustable suspension with EDC controller for on the move electronic adjustment. - off

Basically they frown on anything that isnt std. So if yer buying the car fer all the bits, and end up taking them off later, is it worth the extra?

They can be engineered, but it will cost, and once again regency can say no they dont like it anyway (law unto themselves) and dont have to comply with any engineers report.

OK thanks for that.....

But what would be needed to be removed for the very first check to get redgo here?

anything that is an obvious defect...Nothing that would make them considering calling u back >_<

Probably just keep the sus jacked up, swap the clear cover, and try hide the turbos under some heat shield and u should be in and out.

cheers for the advice!

wish it wasnt in Queensland!!! id be driving if it was in melb!

Have bought a few cars including my GTR interstate.... you must take it for an identity check only. (check vin/engine no to see if stolen)

Go to sturt inspection depot... will be easier than regency.

However if they see any obvious major defect they will send you to regency for full inspection.

CORRECT..........and the things that stand out the most are black windows, too loud and too low.....other than that make sure your pods are secured because they sometimes shake them.

my dear Adam

why dont u try to get a stock 33 GTR

at least u know it hasn't been thrashed

go through Regency, then mod what u want... the right way

IMO

honestly for 2 reasons.

1 stock can still be thrashed!

2 cheaper to buy one with things done to it already then out lay yourself and its easier to do it that way

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...