Jump to content
SAU Community

Recommended Posts

Hi All,

I've been driving now for about 2 years and have learnt alot along the way. I still think i have alot to learn.

In particular i wanted to know about certain things that may be general knowledge to more experienced drivers such as;

1) How can i use road numbers to the best of my advantage?

-is there a code in assigning road numbers ie, East-westbounds rds vs North-southbounds roads?

-Particular numberings such as M1, A430 ...what do they mean?

2) Do you know of ways to better use a street directory? Certain overlooked symbols?

3) Parking tips?

-for example i learnt never to park at the last bay where your car becomes the 'corner' and there is a high chance of someone swiping you. Any similar tips?

4)Is there cheap short term parking in melbourne (melbourne central area)? is there a website that lists parking spots? This is mainly for weekend parking, i'm aware QV is all day weekend for $10, are there better options?

Look forward to hearing your thoughts

Link to comment
https://www.sau.com.au/forums/topic/198055-general-road-knowledge/
Share on other sites

I think sense of direction is something you are either born with or have non at all. Buy a GPS for your car and that should help you. If you can remember images of places you are going etc you will find it easier, thats how i know where to go etc i can picture it all im my mind if i have been there before and usually only need to go somewhere once to know how to get there any other time but again thats something that you either can or cant do.

If you don't know where you are/are going, stick to main roads as long as possible (even if directions say it's quicker through the back streets). It's easy to miss turns when the streets don't quite match what's on the maps, but main roads tend to have more/bigger signs to make finding streets easy.

On road designations, the letter designates the type of road.

M = Motorway

F = Freeway (or possibly Federal Highway, I can't remember)

Then you have A, B, C (and possibly D) roads. From A-D the road's quality decreases. An "A" road would be your typical country highway (think of the highway from Geelong to Adelaide), probably with a 100km/hr speed limit.

A "B" road is a more winding road. Still well surfaced and probably reasonably wide, but not quite highway level. Great Ocean Road is a B road.

A "D" road would be a narrow laneway, probably one lane wide in both directions. You'd struggle to get two cars to pass each other on such a road. It might not even be sealed.

There should be official designations on how each road is ranked on VicRoads, but they tell you how wide and how "safe" the road is.

The number, I believe, is an arbitrary value used to designate that specific road. Its not tied to anything else.

  • 2 weeks later...

If you buy a street directory get a melways, ubd are the most useless piece of junk ever made.

But #1 get a gps, makes life a lot easier, take it from a truck driver who has had to use a street directory untill recently, but if you persist with the melways you too will be able to talk on the phone (handsfree of course) drive with one hand and hold the melways with the other.... aledgidly..........

If you buy a street directory get a melways, ubd are the most useless piece of junk ever made.

...

QUEENSLANDERS take note, the Brisway is FAR superiour to the ubd. People from melbourne know what they are talking about with that one.

Anyway, just go for random aimless drives. Go with some mates, you get to an intersection, first to say left/right/straight wins and thats where you drive. (have street directory handy for when the fuel light comes on tho). Just remember landmarks etc. Best way to learn the place is to get lost.

And I always park next to a pier or a wall. Means its only one side of the car some fool can open their door in to, not both.

Thanks for the tips!

With regards to getting a GPS system, from what i've seen with freinds using GPS, they're sometimes unreliable and fail to give directions at convenient times, also why spend $200+ when people have been driving fine in years past without the technology(Using GPS is abit soft imho if your not a courier/truckie).

yeh even if you get GPS, dont rely on it, make sure you carry a melway too. friends and i went on a random trip to sydney, and he was relying on his GPS, sure enough the thing just died and couldnt get it to work again. i dont know sydney as im a melbourne boy, but still knew where the arterial was to get us home. f*ck it was funny watchin my mates panic though, they just had no idea what to do lol

With regards to getting a GPS system, from what i've seen with freinds using GPS, they're sometimes unreliable and fail to give directions at convenient times

But if your no good a reading a melways then you will get in less shyte with a gps than you will trying to figure out where you are going with a map.

Just make sure you get a decent unit with up tp date maps and set it up right, i have found with tomtom that if you choose to go the most direct route its usually slower than if you choose to go the fastest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...