Jump to content
SAU Community

Some F*#%@!er backed into my car today!

Ash

By Ash,
in New South Wales

 Share

Recommended Posts

Ash Grand Master

Ash

Posted
Posted

and the thing that shits me the most is that it hasn't even dinted my rear bar, however all the paint has flaked and fallen off. its going to need a respray for sure :) does anyone have the paint code for white?

also i noticed there is some water in my indicators and park lights :D how do i find where its getting in and stop it.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/19827-some-fer-backed-into-my-car-today/
Share on other sites
XEQTOR Community Regular

XEQTOR

Posted
Posted

I backed into a tree at St Leonards after a nite shift last week. It was actually quite amusing I thought. There it was, the ultimate parking spot, tree in front, tree behind it, just begging me to park in it. It was right out the front of the coffee shop where my g/f was awaiting for the morning after work for me start of work for her coffee, she was sitting there with bout 5 other ppl out the front of this place. I reverse in and "CRUNCH". Couldnt see anything but it made "THAT" sound ya just dont wanna hear! So I poke my head out the window and all i could say was "OOOOPS, YA GET THAT". Turns out i flattened the poor little tree and chipped alittle fibreglass off my bar.

The coffee was good though!

JimX Grand Master

JimX

Posted
Posted
Originally posted by a5h

funny you should say that, my mum was driving my grandfather (now 87) home in her car when a skyline passed them, mum noticed but didn't say anything and my grandfather said thats a nissan skyline like ash's

So it was YOUR GRANDFATHER that's been going around vandalising our cars! :rolleyes:

Sonic Community Regular

Sonic

Posted
Posted

Hey guys and gals, sorry to hear about everyones' misfortunes... Although it could all be a lot worse: a council front-end loader pushed its bucket into a mate's car (JZA80 Supra) after it had just come back from getting a $8000 respray in custom candy that morning.

We nearly cried...

Sonic Community Regular

Sonic

Posted
Posted

Well they paid the repair cost, even they have comprehensive insurance coverage... It was just a crying shame he got the car back after a total strip-down respray that took a bit over a month (the dude was slow. Good, but slow) and only had it for 3.5hours before it was being loaded onto a tow-truck...

He saw the error of his ways and sold it after he got it back (another month, although this time he got an insurance loaner-car!) and bought an R32 GT-R...

JimX Grand Master

JimX

Posted
Posted

Ah, good that it was a happy ending. I'd really hate for some scum of a council worker to do that sort of thing and do a runner, or just totally deny ever doing the damage (which would be easy to do with a front-end loader I would say).

Apparently a LOT of bus drivers (both private and government) will deny hitting someone just to avoid the company having to pay up. Must be because of management telling them to do so, or imposing penalties on any drivers involved in an accident.

Sonic Community Regular

Sonic

Posted
Posted

I had a lady in a 4WD back into the grill of my car (damn high-mount towballs!) and she admitted to hitting it. Then when the bill for the grill (which had to come in from Japan) landed on her doorstep she denied it was her car and claimed she was elsewhere at the time...

Our solicitors chatted for a while (it's the principle of the thing!) and she agreed to pay different quote. So i got a mate to fabricate a new, custom mesh grill which was twice as expensive and she had to pay it. Revenge is sweet!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...