Jump to content
SAU Community

Recommended Posts

Hi,

I tried to change one of my parkers today as it had blown and had no luck what so ever.

Hopefully someone can point me in the right direction...

What i've figured out so far is that the red top bit which is showing near the wires needs to come off to release the globe so I can remove it from socket and replace? But I can't seem to locate the clip holding it or how to undo it.

If anyone could be of assistance it would be great, I've done some searching but nothing pops up for replacing r34 parker globes/bulbs....

Link to comment
https://www.sau.com.au/forums/topic/198821-changing-r34-parker-globes/
Share on other sites

Not sure about a red top bit though.

have a look at your headlights from the outside, staring at your parkers. locate the position. its the furthest to the outter side.

Now that you know where abouts it is. look behind your headlights and locate it from behind. there's no clips holding it in place. its a tight sqeeze if you have big hands or a big battery (remove Battery if thats the case.)

Should be a light grayish socket, get a firm grip onto it and twist the whole socket/plug clockwise until it becomes loose, if it doesnt seem to twist, try the other way(anti-clkwse).

pull it straight out and replace bulbs as normal.

Thank's guys will give it a try tomorrow.

Yeah going good, just doing minor "ricey" bits at the moment investigating 4 door exhaust's as thats my next real upgrade, got the teins in for a while now and a nismo rear sway bar on order so that should do the handling I hope.

Just fitted ultra white LEDS to mine, looks heaps better cos they match the Zenons realy well.

Where did ya get em from?

Cause i just finally changed mine lol and the Navara Artic Blue Ultra White's are not like my xenon's at all might as well have just stuck with normal white lights lol, though one was blown so needed changing.

I had the Narva one's too but as you found they just arn'nt white enough. The new LEDS i got are called 3A racing professional bulb series, brought them from Autobarn for about $8. (take your old one in to ensure you get the right ones)

After fitting the new LEDS, make sure they are working before re fitting back into position (as you know they are a pain to get out), if not working remove LED rotate 180 deg and refit.

I actually found it easier re fitting them while they were on cos you could see what you were doing.

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...