Jump to content
SAU Community

Recommended Posts

Hi,

I tried to change one of my parkers today as it had blown and had no luck what so ever.

Hopefully someone can point me in the right direction...

What i've figured out so far is that the red top bit which is showing near the wires needs to come off to release the globe so I can remove it from socket and replace? But I can't seem to locate the clip holding it or how to undo it.

If anyone could be of assistance it would be great, I've done some searching but nothing pops up for replacing r34 parker globes/bulbs....

Link to comment
https://www.sau.com.au/forums/topic/198821-changing-r34-parker-globes/
Share on other sites

Not sure about a red top bit though.

have a look at your headlights from the outside, staring at your parkers. locate the position. its the furthest to the outter side.

Now that you know where abouts it is. look behind your headlights and locate it from behind. there's no clips holding it in place. its a tight sqeeze if you have big hands or a big battery (remove Battery if thats the case.)

Should be a light grayish socket, get a firm grip onto it and twist the whole socket/plug clockwise until it becomes loose, if it doesnt seem to twist, try the other way(anti-clkwse).

pull it straight out and replace bulbs as normal.

Thank's guys will give it a try tomorrow.

Yeah going good, just doing minor "ricey" bits at the moment investigating 4 door exhaust's as thats my next real upgrade, got the teins in for a while now and a nismo rear sway bar on order so that should do the handling I hope.

Just fitted ultra white LEDS to mine, looks heaps better cos they match the Zenons realy well.

Where did ya get em from?

Cause i just finally changed mine lol and the Navara Artic Blue Ultra White's are not like my xenon's at all might as well have just stuck with normal white lights lol, though one was blown so needed changing.

I had the Narva one's too but as you found they just arn'nt white enough. The new LEDS i got are called 3A racing professional bulb series, brought them from Autobarn for about $8. (take your old one in to ensure you get the right ones)

After fitting the new LEDS, make sure they are working before re fitting back into position (as you know they are a pain to get out), if not working remove LED rotate 180 deg and refit.

I actually found it easier re fitting them while they were on cos you could see what you were doing.

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...