Jump to content
SAU Community

Fiberglass Front Guards Compliable?

BRUNSKIGTST

By BRUNSKIGTST,
in Victoria

 Share

Recommended Posts

saff_cossie Grand Master

saff_cossie

Posted
Posted

The car has been in the country for a while then as that rule was abolished shortly after mine came in on it in 2004 ish?

Edited - actually I seem to remember something about still being able to bring cars in that were up to that 15 year age but it wouldnt continue in the way it had but being able to import a 1990 in 2005, then a 1995 car in 2010 etc. It was just up to 2004/2005 I think.

Without knowing with 100% certainty, I would say no. The car didnt come from the factory like that (or did it?)

BRUNSKIGTST Proficient

BRUNSKIGTST

Posted
  • Author
Posted

i herd u can get away with few things when cimplying under 15yo rule as that the importer complied it the car way much befor the 15yo rul eneded so he had it for long time just want to know if i could get away with putting fiberglass front guards or would i have to put them on after comply lolz

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

What car?

The 15yr old rule was trashed from memory, and hence regardless of it being landed...

It must still be complied then under the law, not 3 years later under a rule that no longer applies. (using the 3yrs as example)

Compliance is "bringing in" in terms of what your talking about.

BRUNSKIGTST Proficient

BRUNSKIGTST

Posted
  • Author
Posted (edited)

oh sorry lol forgot to put down what my car is lol its a 1989 - 1990 R32 gtst and has the papers brought in under 15 yo rule

Edited by BRUNSKIGTST
BRUNSKIGTST Proficient

BRUNSKIGTST

Posted
  • Author
Posted (edited)

ow it hasnt been complied yet thats why im asking can i comply my 32 with fiber glass fenders lol thats all i want to know lol and its going to get complied over the 15 yo rule

Edited by BRUNSKIGTST

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...