Jump to content
SAU Community

Recommended Posts

Make:Nissan

Model:R33 GTST Skyline

Milage:160 xxx

Transmission:5 Speed Manual

Colour:Black

Location:Brisbane

Complied?Yes

RWC supplied?Yes

Currently registered?Yes till 5/08

Price:$13,000 ono

Contact:PM

Comments / Modifications: I got the car early this year, complete stocko since then ive added,

Greddy FMIC

Apexi SITC

Apexi Turbo Timer

Apexi SAFC-2

HKS Electronic Boost Controller

K&N Pod Filter

3 Inch turbo back exhaust with split dump

Full Alpine Stereo system worth $2300

The interior is in very good nick, the air con is ice cold. I want to get an R32/R33 GTR so this has to go for that to happen.

The car runs well, Recently had all of the gaskets and seals replaced, Compression tested at 150psi+ per cylinder. Uses no oil, Economical for an rb25 as well getting 550kms a tank with sensible driving nearly 600 on the highway. No funny noises, no rattles or knocks. Handles well. Only issue is the paint has a few scratches in it, nothing that cant be fixed.

Was dyno'd at 193kw at the rears at 13psi, As a daily it sees 9psi most times, The HKS EVC 5 is set to 9 and 13psi.

Thanks for looking.

Images:PM me and i will email them to you, or you can inspect the car for yourself

Edited by Skyrin3
Link to comment
https://www.sau.com.au/forums/topic/199631-r33-gtst-brisbane/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...