Jump to content
SAU Community

Recommended Posts

Due to the lack of interest in the R33 GTR I thought I'd list this as well incase somebody is interested. Wheels and wing do not come with the car. Loking for $19000 with reg or $21500 with susp and reg. Has about 9 months left. Would make a bloody good track car if you want to get on the track. Will smash all gtst's and any wrx that has had under 40k spent on it. It had Laggy R32 N1 turbos on it which I have sold but it was only making 280rwkw detuned for reliability with a 8k rev limit. Stock turbos can make 260rwkw with less lag. Buy it with the susp and see what it will do on semi's. Should run a low 1.20 at Sandown and around a 1.48 at PI with semi's and better brake pads. See my sig below for how it goes on the track. I Don't want to sell it but one has to go

I'm in Melbourne.

Its a 89 model

BODY:

STI Blue

Flared Gaurds

Black boot, no wing

Carbon bonnet + original

I have the N1 side skirts apart from the front pieces because I melted them in a paint stripped bath.

Engine:

HKS 2.7litre forged piston big bore kit - Worth lots $

3.5inch exhaust.

Stock turbos etc

Susp:

Cusco hicas lock bar

Lowered springs

Brakes:

Just fully overhauled

Stipped calipers with new paint and seal kits

324mm R33 GTR rotor conversion

New slotted rotors front and rear

New blue braided lines with solid not rubber crimps.

Interior:

Nismo 320kmh dash

Custom GTR dor inserts

I can supply this with all of the track suspension if interested for $2500 extra and can leave installed

Circuit valved Bilstien shocks by Sydneykid with coilover kit. Cost me a fortune! Out of one of the Production cars SK sets up. They upgraded to DMS(Big $)

Whiteline front and rear adjustable swaybars with extra adjustment holes added and bushes.

Cusco fixed bearing upper front arms 3.5degree neg.

Cusco rear adjustable upper arms with sepherical bearings.

Tein adjustable castor rods with sepherical bearings.

Cusco front and rear strut braces.

I had Tien shocks in my car with the cusco links and the car was alway a handful to drive. Wouldn't tip in and would always oversteer on exit. With the shocks and swaybars I cut about 4 seconds a lap off my times. To give you an idea my car in full roads gear on normal road (280utag) tyres. Couldn't afford to run semi's. It does PI in a 1.52.2 and Sandown 1.23.9 there is easily another 1.5 seconds in both of these track with a little more practice and better brake setup. Still running stock pads in the rear and shit EBC pads front. The car only has 280rwkw. The car is really balanced at the moment and never unpredicable. Slightly understeers through corners and can be made to oversteer if more power is feed on or trail braked. Very safe on the track. No chance of going off unless you do something very wrong.

Put some semi comps on and some better pads and see what your can really do in your car. They say semi comps are worth 3-4 seconds a lap over road tyres.

The car has also done very well and the DECA/motorcana days when I'm not hitting cones. Almost matching the big $ cars with more experience.

It will be the best money you've ever spent.

Gareth

0417370869

post-1670-1199356508_thumb.jpg

post-1670-1199356801_thumb.jpg

post-1670-1199356838_thumb.jpg

post-1670-1199356964_thumb.jpg

great car man quick question would it eva pass road worthy up here in qld....im very interested ... i want a gtr bad but this is all ive got..... hav a look n send me a reply thanx

http://www.ozmazda.com/board/index.php?showtopic=5038

Ive been in this car - its really fun guys. If i was in the market for another 32 i know what id be buying :thumbsup:

Btw Gareth, have you got the wheel specs there? I had a look but couldnt see them

Good luck with the sale (its a shame to see it go)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...