Jump to content
SAU Community

Recommended Posts

i have a S2 R33 for vehicle reference.....:i tried a pod and it made my car more unresponsive....like it had a bit of room on the accelerator that made no effect.(dont know how else to explain it)...also had some huge suction noise which i wasnt a fan of....but i did have the flutter i was after.....

could of the problem with the pod been that the connect to the AFM was not completely airsealed tight or something..or does this happen normally by making it less responsie?...any advice or answers would be awesome!

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/
Share on other sites

so its the hot air makin the suction noise really loud and it is also makin it unresponsive?

is that what ur tryin to say?

The Air is making the noise... the fact that its hot is irrelevant

The fact that it is hot has other meaning... hot intake temps = slower car.

So put the airbox on with a good panel filter, best thing for the car... you just dont get noise.

But that can be countered by sticking your head out the window and whistling if you want, it pulls chicks all the time

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3565026
Share on other sites

The Air is making the noise... the fact that its hot is irrelevant

The fact that it is hot has other meaning... hot intake temps = slower car.

So put the airbox on with a good panel filter, best thing for the car... you just dont get noise.

But that can be countered by sticking your head out the window and whistling if you want, it pulls chicks all the time

unlike u mate i dont need to do anything to attract them...:)

jus jks but i had to post it....lol

DONT TAKE IT TO HEART...

cheers for the advice tho!

if u dont like the pod sound, get a k&n panal filter and use the stock airbox.

when my 33 had this setup boosted @ 12psi i got a nice whistling sound from the panal filter.

its not really the 'pod sound' i dont like....it like it as then i get a bit of 'flutter'...because BOV's are defectable i get the chopping noise which i like better than a huge psscchhhhtt!

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3565207
Share on other sites

since this a pod thread thought id ask my question here......

i got a cone shapped pod on my rb20 like the k and n shapped 1s, but most skyline have the mushroom/dome shaped filters, are they better then the cone or is just preferance n wat fits in the motor?

Most people would agree that the mushroom/dome shaped filters, which are normally foam filters, are worse than the paper/cotton style filters. Perhaps better flow, but they're very lacking in filtration and have a habit of coming apart and with bits of foam getting sucked into your engine if you don't replace them often enough.

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3573123
Share on other sites

ook ok cool lol i guess ill keep the cone 1 in that case............ do the foam ones give off a different note cause my pod makes a annoying whisteling sound

Box it. This is just because the pod filter isn't muffling the noise of the turbo like the stock air box would

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3574564
Share on other sites

its not really the 'pod sound' i dont like....it like it as then i get a bit of 'flutter'...because BOV's are defectable

Whether unboxed pod filters are defectable or not (and I've heard arguments on both sides), the cops will assume it is defectable and issue you with a notice anyway.

Link to comment
https://www.sau.com.au/forums/topic/200335-pod-filter/#findComment-3574741
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
    • Yuh, My new R34 box is sitting on the workshop floor (in its large shipping box, which is a nice thing on its own), along with a front plate to convert to push clutch. There was no way I was interested in rebuilding my existing one. Was only partly interested in the risk of buying a used one. But, if you want a 2nd hander, I can point you to one in/near Melbourne at least. @Komdotkom has one that should be in good enough condition to be usable. I don't think it's in a for sale thread, you'd have to message him. @redzedhas one that definitely needs a rebuild.
    • I used to love going to Amaroo to watch the HQ series go for broke (eventually stopped due to lack of spare parts) and also the Porsche series.  It was so cool to back your car up to nearly the edge of the viewing barrier and party with your friends, having a bbq and alcoholic/non drinks. It was such a family/mates atmosphere
×
×
  • Create New...