Jump to content
SAU Community

Recommended Posts

Yep that's cool. I know a guy in Japan that is going to send them over for me. Are there any cheaper alternatives to the Cusco's?

If you wants branded type wants like cusco, JIC, ikeya. Its almost the same price within A$50 difference. So its just a matter of preference. Unless you want to go for the generic brands ones. Like its japanese but no brands or some name they give it. Like Dmax or something. Probably you can try and look in the stagea section in Yahoo auction.

Heres the link to one of the generic brand ones. They claim to be Made in Japan.

http://page8.auctions.yahoo.co.jp/jp/auction/h39417299

Link to comment
https://www.sau.com.au/forums/topic/200477-camber-arms/#findComment-3567465
Share on other sites

When adjusting camber on the rear you should not only adjust the length of the upper arm but also the length of traction rod to match. If you don't you will end up with noticeable bump steer as the steering arm and the traction rod will fight the length of the upper control arm as the suspension goes up and down, causing toe changes. That's why the Whiteline rear camber kit comes with 4 offset bushes (2 each side) so that you can adjust both the upper control arm AND the traction rod.

In case you haven't read it, this thread explains why using spherical bearings in road cars is not a very good idea.

http://www.skylinesaustralia.com/forums/Wr...mp;hl=spherical

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/200477-camber-arms/#findComment-3567474
Share on other sites

Thanks for the post Gary.

To be honest, the main reason that I want aftermarket arms is that I plan on lowering my car quite a lot. Obviously I'll fore go a bit of handling in doing so, but I'm prepared to wear that as a cost (I won't be driving the car that much anyway). Are there any other alternatives aside from the bushes themselves that may be a better option?

Link to comment
https://www.sau.com.au/forums/topic/200477-camber-arms/#findComment-3567808
Share on other sites

Thanks for the post Gary.

To be honest, the main reason that I want aftermarket arms is that I plan on lowering my car quite a lot. Obviously I'll fore go a bit of handling in doing so, but I'm prepared to wear that as a cost (I won't be driving the car that much anyway). Are there any other alternatives aside from the bushes themselves that may be a better option?

What's "quite a lot"? Have you done your research on what is required for whatever "quite a lot" is? What sized (offest/width) wheels are you going to use at the "quite a lot" height? Have you considered flared guards, rolled lips, removal of the plastic inner guards, drive shaft angles, bump steer, tyre clearance to the lower spring seats on the rear, Ackerman angle changes on the front, exhaust system size in relation to ground clearance etc etc. Do you know how much camber you need to remove at the "quite a lot" height so that the wheels, whatever offset/width they are, still clear whatever it is that you have done to the guards?

Camber correction is the easiest to solve of your problems, once you know how much you need. I would be very surprised if 2 camber correction kits (Whiteline or Noltec) don't do the job just fine.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/200477-camber-arms/#findComment-3568245
Share on other sites

I have the wheels already - width and offset should be perfect for a Stagea. I'll need to roll the lips a tiny bit.. Not sure how I'll go with the plastic guards yet.

Tyre clearance should be ok due to the offset of the wheels, but I'll probably end up taking the coilover route anyway so I can get it that bit lower.

As mentioned, I know I have to fore go some handling for looks but I'm fine with that.

Link to comment
https://www.sau.com.au/forums/topic/200477-camber-arms/#findComment-3568331
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...