Jump to content
SAU Community

Recommended Posts

ooo

and if you are building the RB26 from R32 you may need a new oil pump drive collar..

I have a new JUN one spare. $200 still in the box

the original oil pump drive only engages halfway into the oil pump, causing stress on the drive and the gear. Resulting in failure. The JUN item replaces the standard one and fully engages the oil pump drive.

Nissan rectified this problem in the R33 series engines upward.

cms

need everthing for rebuilding my rb26

who can help me?

hey got a high performance rb30 bottom end and rb26 top end it running all hks running gear engine build to make 800hp .engine has not been put together all parts a brand new have spend over 25k and willing to let go for 12k.incudes g readdy intake manifold microtech ecu turbo etc extrnal wasregate will inpress ...this engine has got everthing aftermarket ......please sms me on 0432288382 and i return your call

I've got some 800cc injectors, z32 air flow meters and pods filters, chip torque ECU programable

Few other bits and pieces

contact me on [email protected]

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...