Jump to content
SAU Community

Recommended Posts

Parts as per the R31 coupe in the cars for sale section, if theres enough interest in enough parts then i may strip her out for bits. Please bear with me as far as pricing is concerned, im kinda making this up as i go, everything is open to reasonable offers.

RB30DET engine - standard rb30e block used although low km's, very good condition, S2 RB25det head used, VCT hooked up, RB25 oil pump and head gasket, standard rb25 injectors and intake. harness supplied too. So far has only sat on the 300rwhp mark due to my loss of interest but this motor will safely and reliably make 350rwhp all day every day. $1800

Garret GT3540R turbo, .82 rear, done less than 1000kms on 15psi, purchased mid '07. havnt checked shaft play but i can safely say its minimal. $1500 with home made dump

HKS cast manifold and external gate, low mount, very sturdy and discreet looking $offers?

*prefer to sell the turbo and mani/dump together, making it a true bolt on kit!

RB25DET gearbox, good condition, run on redline oil, no crunches or nastiness $1500

Buy the engine and gearbox together and get the 2500lb 6puck ceramic clutch thrown in!

apexi PowerFC for RB25, comes with hand controller $800

z32 AFM $offers

Series 2 RB25DET ECU $100

single peice tailshaft to suit RB25 gearbox into HR31 $offers

And finally the rolling licenced R31 GTSX, perfect condition, genuine 77000km's, front mount intercooler and plumbing supplied, adjustable S13 coilovers all round, !!5STUD!! conversion, R33 front brakes, r32 rear, 17" mags, sparco racing seats, Hicas locked and with R31house subframe bushes, Stagea steering rack. buy this car, drop your motor in and have a sweet sweet hr31. $offers around the $7000 mark please. keep in mind the cost of 5stud conversion, s13 coilovers, FMIC and the rims, plus an absolutely mint body, and this is a CHEAP price.

All of the above I can fit into your car also for a fee.

Please note again, I'm trying to sell the car complete, so if you want these parts immediately im sorry but no can do :thumbsup:

Steve 0419193341

Link to comment
https://www.sau.com.au/forums/topic/200861-perth-rb30det-gt35r-r33-box-more/
Share on other sites

any pics?

What are you interested in? the majority of the parts you would know what they look like, im taking a couple photos of the HKS mani tomorrow. Keeping in mind everythings still in the car so pics are difficult. for a pic of the car look in cars for sale.

price for the gearbox is stated in the original thread, $1500 ono

Im in balga, perth.

And ive have had about 6 strong shows of interest in the R33 powerFC, which leaves me in a pickle..... If somebody is wanting it really really bad and is willing to pay a bit more than my asking price, send me a PM, otherwise it will go to the first person who asked.

thanks for all the replies and PMs fellas, dont be offended if i dont answer straight away, I need to keep it together for the time being as i may have a couple people who need to see it driveable. cheers.

was i first in about the pfc? just so i know. can stop looking for another one

Looks like the complete setup is sold.... engine, gearbox, mani, turbo, afm and PFC all gone in one hit. smart man i say. Apologies to all who wanted the bits n pieces, but of course im going to sell the package before i separate. cheers fellas. Buy the licenced 31 shell instead. please?

how much just for the rb30 block only? if you would open it im keen.

dr mafia - hmm, you might wanna read the thread a bit more carefully mate.

gt passage - will consider as a last resort only, i want the whole thing moved on... sell yours and buy the rolling coupe?

Edited by TurkeySlapper

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...